Need help?Do you have a question about the Suunto ELEMENTUM AQUA and is the answer not in the manual?
Instructions for entering and navigating the SETTINGS menu to adjust watch parameters like time and date.
Explanation of switching between TIME and DIVE modes and automatic mode switching based on water contact.
Essential preparations before diving, including verifying time, date, battery level, and measurement units.
How the watch automatically enters DIVE mode and begins dive time recording based on depth thresholds.
Information displayed while diving: dive time, current depth, maximum depth, and water temperature.
How dive data is saved, surface time is counted, and data is displayed after a dive.
General| Water Resistance | 100 m |
|---|---|
| Material | Stainless Steel |
| Weight | 110 g |
| Battery Life | Up to 12 months |
| Bezel Material | Stainless Steel |
| Case Material | Stainless Steel |
| Strap Material | Silicone |
| Battery Type | CR2032 |
| Depth Meter | Yes |
| Dive History | Yes |
| Operating Temperature | -10°C to +60°C |
| Storage Temperature | -20°C to +60°C |
| Category | Dive watch |
| Depth Meter Range | 0 to 80 m |
| Functions | Depth, Dive time |
To Next Page
