Suzhou Kunteng Electronics KT-LCD6 User Manual

KT-LCD6 e-Bike Display User Manual V1.0
Dear customer, please read this manual before you use KT-LCD6 instrument. The manual will guide
you use the instrument correctly to achieve a variety of vehicle control and vehicle status displays.
Functions and Display
Instruments using the structure form of instrument body portion and the operation buttons are
designed separately.
1
UP button
9
Mil
Distance (imperial)
2
SW button
DST
Trip distance
3
DOWN button
ODO
Total distance
4
Battery capacity indicator
VOL
Battery voltage
5
TM
Single trip time
10
Backlight and headlights
TTM
Total trip time
11
The brake display
6
KM/H
Riding speed(metric)
12
CRUISE
Cruise function display
MPH
Riding speed (imperial)
PAS
PAS starting display
MXS
MAX speed
THROTTLE
Turned on throttle
AVS
Average speed
13
6KM/H push power assist
7
ASSIST
Pas level
14
MOTO ℉ ℃
Motor temperature
8
CADENCE display
MOTOR W
Motor Power
KM
Distance(metric)
15
℉ ℃
Environment temperature
Operation
1. ON/OFF
Hold button long to turn on the power, and hold long for a second time to turn off the
power. When the motor stops driving and when the e-bike is not used for a consecutive 5 minutes, it will
automatically shut down and turn off the motor power supply.
2. Display 1
Hold button long to start up and enter display 1.
2.1 Turn on backlight and headlights
Hold button long to turn on backlight and headlights (the controller
should have headlight drive output function); hold long again to turn off
the backlight and headlights.
2.2 Assist ratio gear (ASSIST) switch
Hold or button shortly to switch 1-5 file gear. Gear 1 is for the
minimum power, gear 5 is for the highest power. Each startup will automatically
restore the gear shutdown last time (the user can set randomly). Gear 0 is
without booster function.
2.3 6KM/H power assistant push function
Hold button and flashes, the vehicle drives at the speed not
more than 6Km /h. Release button, the function is invalid.
2.4 Cruise function(CRUISE)
After the cruise function is turned on, the trip riding speed is greater than
7 km/ h, hold button long and enter cruise, the CRUISE lit. Brake or hold
any button to cancel.
2.5 Turned on throttle (THROTTLE)
Turned on throttle, the display interface shows THROTTLE.
2.6 Power-assist startup
When the booster riding, the display interface shows PAS.

Suzhou Kunteng Electronics KT-LCD6 Specifications

General

Brand	Suzhou Kunteng Electronics
Model	KT-LCD6
Category	Bicycle Accessories
Language	English

Summary

Functions and Display Overview

Display Interface Basics

Introduction to the main display interface and startup procedure.

Backlight and Headlight Control

How to turn the display backlight and headlights on and off.

Assist Ratio Gear Selection

Switching between power assist levels (0-5) for motor control.

6KM/H Power Assistant Push

Activating and using the 6KM/H walk assist function.

Cruise Control Function

Procedure for engaging and disengaging the cruise control feature.

Throttle Operation Display

Indication on the display when the throttle is engaged.

Power-Assist Startup Display

Visual feedback on the display during power-assist mode engagement.

Operation and Data Management

Power On/Off and Auto Shutdown

Instructions for turning the unit on/off and its auto-shutdown feature.

Display and Clear Single Data

Viewing and clearing single trip time (TM) and distance (DST).

Battery Capacity Indicator

Understanding the battery level display and low voltage warnings.

Brake Status Display

How the display indicates when the brakes are applied.

Cadence Function Display

Display of pedal revolutions per minute (RPM) in assistance mode.

Advanced Display Modes and Error Handling

Display Interface Navigation

How to navigate between different display interfaces (Display 1-5).

Automatic Display Switching

How the display automatically switches between modes after a set time.

Meter Power Off

Procedure to power off the meter and controller simultaneously.

Error Code Display and Definition

List of error codes and their meanings for troubleshooting.

Motor Temperature Alarm

Indication of motor overheating and controller protection response.