Suzuki 1999 SY418 User Manual

FOREWORD
This manual has been prepared to help inspection
and service works involving electric wiring of the fol-
lowing model be done efficiently.
Applicable model: SY413/SY416/SY418/SY419
(Produced on and after June ,1999)
(For VIN of applicable vehicles, refer to Appli-
cability in page 8A-1-2 of this manual.)
In order to make a good use of this manual, it
is important to have a full understanding of its
first section "HOW TO USE THIS MANUAL".
All the data and information contained in this
manual are based on the vehicle of certain
specifications. Therefore, please note that the
actual vehicle being serviced may vary some-
what because of differences in specifications
or statutory regulations.
All information, illustrations and specifications
contained in this literature are based on the
latest product information available at the time
of publication approval. And used as the main
subject of description is the vehicle of stan-
dard specifications among others. Therefore,
note that illustrations may differ from the vehi-
cle being actually serviced. SUZUKI MOTOR
CORPORATION reserves the right to make
changes at any time without notice.
For inspection and service works of electrical
parts, following reference materials are also
available for your help.
COPYRIGHT SUZUKI MOTOR CORPORATION 2000

TABLE OF CONTENTS
CONNECTOR LAYOUT DIAGRAM
INSTALLATION POSITIONS
OF SINGLE UNIT PARTS
GROUND POINT
POWER SUPPLY DIAGRAM
SYSTEM CIRCUIT DIAGRAM
LIST OF CONNECTORS
SECTION
HOW TO USE THIS MANUAL
8A-1
8A-3
8A-4
8A-5
8A-6
8A-7
8A-8
RELATED SERVICE MANUAL
• SY413/SY416 Service Manual.............................................................................(99500-60G00-01E)
• SY418 Supplementary Service Manual .............................................................(99501-62G00-01E)
• SY416/SY418 Supplementary Service Manual (For Suspension Control System)
(99501-60G01-01E)
• SE/SV/SZ/SY Series Supplementary Service Manual (For Immobilizer Control System)
(99501-60G10-02E)
• SY413/416/ Supplementary Service Manual (For O
2
Sensor Heater)..............(99501-60G20-18E)
• SY416/SY418 Supplementary Service Manual (For Wagon)............................(99501-60G30-01E)
• SY413/SY416/SY418 Supplementary Service Manual......................................(99501-60G41-01E)
(99501-60G50-01E)
(99501-60G60-01E)
• SY419 Supplementary Service Manual .............................................................(99501-66G00-01E)
OVERSEAS SERVICE DEPARTMENT
(E)

Suzuki 1999 SY418 Specifications

General

Brand	Suzuki
Model	1999 SY418
Category	Automobile
Language	English

Summary

Foreword

Applicable Models

Specifies the vehicle models covered by the manual, including SY413, SY416, SY418, SY419.

How to Use This Manual

Guides the user on effectively utilizing the manual's sections, emphasizing the first section.

Model Specification Notes

Notes that manual data is based on specific vehicle specifications and may vary.

SUZUKI MOTOR CORPORATION Reservation

Disclaimer about potential differences and SUZUKI's right to make changes without notice.

Related Service Manuals

Lists other available service manuals for related systems and their part numbers.

How to Use This Manual

Manual Contents and Description

Outlines the diagrams and lists included in the manual, such as harness routing and connector layouts.

Applicability

Lists the specific vehicle models applicable to this manual.

Cautions in Servicing

Provides essential safety precautions for electrical system work to protect parts and prevent fire.

Symbols and Marks

Explains the graphical symbols used in the diagrams for better understanding of components.

Abbreviations

Lists abbreviations used in the manual and their full terms for clarity.

Wire Color Symbols

Explains how wire colors are represented and interpreted in the diagrams.

How to Read Connector Layout Diagram

Details how to interpret diagrams showing connector locations and harness routing.

Indication of Connectors and How to Read Them

Explains how connectors are indicated and how to read their pin arrangements.

How to Read Installation Position of Single Unit Parts

Guides on how to find the installation locations of fuses, relays, and control units.

How to Read Ground Point

Explains how to identify and locate ground points on the vehicle.

How to Read Power Supply Diagram

Guides on understanding the power distribution from the battery to fuses.

How to Read System Circuit Diagram

Explains how to interpret circuit diagrams showing electrical paths.

How to Read List of Connectors

Guides on how to use the list to identify connector shapes and pin positions.