102
2-2. Charging
AC charging cable
The function, correct operating
procedure, etc. of the AC
charging cable are explained.
■ When using the AC charging
cable and CCID (Charging Circuit
Interrupting Device)
Observe the following precautions.
Failure to do so may cause an unex-
pected accident, resulting in death or
serious injury.
● Do not attempt to disassemble or
repair the AC charging cable,
charging connector, plug or CCID
(Charging Circuit Interrupting
Device).
If a problem arises with the AC
charging cable or the CCID
(Charging Circuit Interrupting
Device), stop charging immediately
and contact a SUZUKI dealer or a
qualified workshop.
● Do not subject the AC charging
cable, charging connector, plug or
CCID (Charging Circuit Interrupting
Device) to strong force or impact.
● Do not apply excessive force to the
AC charging cable by forcefully
folding, twisting, pulling or dragging
the AC charging cable.
● Do not damage the AC charging
cable with sharp objects.
● Do not fold the charging connector
or plug or insert foreign objects into
them.
● Do not put the charging connector
and plug into water.
● Do not bring the AC charging cable
to a high-temperature item such as
a heating device.
● Do not apply a load to the AC
charging cable and plug-cord (such
as wrapping the AC charging cable
around the CCID (Charging Circuit
Interrupting Device) and the
charging connector).
● Do not use or leave the AC
charging cable in situations where a
load is applied to the socket and the
plug (such as when the CCID
(Charging Circuit Interrupting
Device) is hanging in the air without
contacting the ground).
● Mode 3 AC charging cable: Do not
use outside the rated voltage (less
than 277 V) or rated current (less
than 20 A).
■ Precautions when handling AC
charging cable
Make sure to observe the following
precautions. Failure to observe these
precautions may result in damage to
the AC charging cable and AC
charging inlet.
● Insert the charging connector
straight into the AC charging inlet.
● After inserting the charging connec-
tor, do not apply excessive force to
or twist the connector. Also, do not
lean on the connector or hang any
objects from it.
● Do not step on or trip over the AC
charging cable.
● Before removing the charging con-
nector, make sure that it is
unlocked. (P.11 4 )
● After removing the AC charging
cable, promptly return it to its
proper location.
● After removing the charging con-
nector, securely install the AC
charging inlet cap.
To Next Page
Loading...
Need help?
General
