Suzuki ACROSS 2020 Series User Manual

349
5
5-5. Using the driving support systems
Driving
Multi-information display
Turning the BSM function/RCTA func-
tion on/off.
Outside rear view mirror indica-
tors
BSM (Blind Spot Monitor)
The Blind Spot Monitor is a
system that has 2 functions:
 The BSM (Blind Spot Monitor)
function
Assists the driver in making a
decision when changing lanes
 The RCTA (Rear Crossing
Traffic Alert) function
Assists the driver when backing
up
These functions use the same
sensors.
WARNING
■ Cautions regarding the use of
the BSM function
The driver is solely responsible for
safe driving. Always drive safely, tak-
ing care to observe your surround-
ings.
The BSM function is a supplementary
function which alerts the driver that a
vehicle is in a blind spot of the outside
rear view mirrors or is approaching
rapidly from behind into a blind spot.
Do not overly rely on the BSM func-
tion. As the function cannot judge if it
is safe to change lanes, over reliance
could lead to an accident resulting in
death or serious injury.
As the system may not function cor-
rectly under certain conditions, the
driver’s own visual confirmation of
safety is necessary.
■ Cautions regarding the use of
the RCTA function
The driver is solely responsible for
safe driving. Always drive safely, tak-
ing care to observe your surround-
ings.
The RCTA function is only a supple-
mentary function which alerts the
driver that a vehicle is approaching
from the right or left at the rear of the
vehicle. As the RCTA function may
not function correctly under certain
conditions, the driver’s own visual
confirmation of safety is necessary.
Over reliance on this function may
lead to an accident resulting death or
serious injury.
System components
A
B

Suzuki ACROSS 2020 Series Specifications

General

Brand	Suzuki
Model	ACROSS 2020 Series
Category	Automobile
Language	English