Need help?Do you have a question about the Suzuki BANDIT 650 and is the answer not in the manual?
General| Displacement | 656 cc |
|---|---|
| Bore x Stroke | 65.5 mm x 48.7 mm |
| Compression Ratio | 11.5:1 |
| Fuel System | Fuel injection |
| Ignition | Electronic ignition (transistorized) |
| Transmission | 6-speed constant mesh |
| Front Suspension | Telescopic, coil spring, oil damped |
| Rear Suspension | Link type, coil spring, oil damped |
| Front Tire | 120/70ZR17M/C (58W), tubeless |
| Rear Tire | 160/60ZR17M/C (69W), tubeless |
| Overall Length | 2, 130 mm (83.9 in) |
| Ground Clearance | 135 mm (5.3 in) |
| Engine Type | 4-stroke, liquid-cooled, DOHC |
| Front Brakes | Dual disc |
| Rear Brakes | Disc brake |
| Fuel Tank Capacity | 19.0 L (5.0 US gal) |
| Overall Width | 780 mm |
| Wheelbase | 1, 470 mm |
| Seat Height | 790 mm |
Specifies the unique part number for the Suzuki Genuine Accessories rear fender.
Details precautions against part tension, importance of original parts, and checking hardware tightness.
Advises users to have technical experience or consult a Suzuki dealer for installation assistance.
Lists and illustrates all required parts and hardware with their respective quantities and specifications.
Provides visual, step-by-step instructions for the physical installation of the rear fender.
To Next Page
