To Next PageTo Next Page
Need help?Do you have a question about the Suzuki Carry Pro and is the answer not in the manual?
Explains the meaning of warning, caution, notice, and note symbols used in the manual for safety.
Suzuki Motor Corporation reserves the right to make production changes without notice.
Modifying the vehicle can affect safety, performance, and may violate regulations; warranty may not cover damage.
Improper installation of communication equipment can cause electronic interference and vehicle performance problems.
This owner's manual provides information on operation, safety, and maintenance.
Lists recorded data such as malfunctions, reactions, operating conditions, status messages, and ambient conditions.
Non-genuine parts may affect performance and are not covered under warranty; some are approved by authorities.
Expressly forbids re-use of airbag and seat belt components due to explosion hazards.
Defines LHD as Left Hand Drive and RHD as Right Hand Drive.
Main section covering safety aspects of driving.
Lists and illustrates exterior components of the vehicle with page references.
Lists and illustrates interior components of the vehicle with page references.
Lists and illustrates instrument panel components with page references.
Discusses proper installation of floor mats to prevent pedal interference and accidents.
Provides warnings and instructions for driver's seat adjustment and seat belt effectiveness.
Discusses proper installation of floor mats to prevent pedal interference and accidents.
Provides warnings and instructions for driver's seat adjustment and seat belt effectiveness.
Details how to adjust seat position for left and right-hand drive vehicles.
Explains the importance of wearing seat belts and their interaction with airbags.
Warns against seat belt modification and improper usage, including lap belt placement and shoulder strap positioning.
Provides advice for pregnant women, avoiding objects under belts, and using belts correctly for children.
Explains how to fasten, tighten, and loosen seat belts without the emergency locking retractor feature.
Describes how to unfasten and stow seat belts properly.
Explains the function of the ELR and how to use seat belts with this feature.
Explains how to position the lap portion of the belt low on hips and adjust for movement.
Describes the driver's seat belt reminder light and buzzer system and its operation.
Provides guidance on inspecting seat belts for proper function and wear.
Details periodic seat belt inspection and replacement after collisions.
Describes the vehicle's supplemental restraint system (airbags) and its components.
Explains the function and potential issues indicated by the AIRBAG light.
Explains how front airbags inflate in severe frontal collisions and their limitations.
Details conditions under which front airbags deploy, including frontal collisions and impacts.
Describes situations where front airbags might inflate due to impacts to the lower body or deep holes.
Lists scenarios where front airbags might not inflate, such as collisions with deformable objects or at specific angles.
Explains that front airbags do not inflate for side impacts, rollovers, or specific frontal collision angles/speeds.
Explains the meaning of airbag symbols found on the vehicle.
Describes how the airbag system detects deceleration and triggers inflation in frontal collisions.
Warns against leaning too close to the airbag, placing objects in its path, or modifying the system.
Details procedures for servicing airbag systems, including battery disconnection and professional repair.
Advises on precautions to prevent carbon monoxide poisoning from exhaust gases.
A section for user notes and reminders.
Describes the vehicle's keys, spare key, and the immobilizer system for theft prevention.
Explains the immobilizer system, its warning light, and how to handle key loss or interference.
Explains the operation of side door locks for both left and right-hand drive vehicles.
Provides instructions for opening and closing the tailgate and warnings about driving with it open.
Details how to open side gates and warnings related to loading/unloading and visibility.
Explains how to operate door windows and adjust rearview mirrors for visibility.
Identifies and illustrates key components of the instrument cluster, including warning lights and gauges.
Explains the low tire pressure warning light and its function related to TPMS.
Describes the operation and meaning of the brake system warning light, including conditions for its illumination.
Explains the ABS warning light's function, including when it should illuminate and potential system issues.
Details the oil pressure warning light, its function, and actions to take if it illuminates.
Explains the ESP warning light's behavior when the stability or traction control systems are active or malfunctioning.
Describes the ESP OFF indicator light and when it illuminates, indicating the system is manually turned off.
Explains the charging light, indicating issues with the battery charging system.
Explains the driver's seat belt reminder light and its function to prompt seat belt usage.
Details the AIRBAG light's function and warnings about potential airbag system malfunctions.
Describes the malfunction indicator light for the emission control system and when to seek service.
Explains the immobilizer system warning light and its indication of potential system issues.
Describes the low fuel warning light and its associated audible alerts.
Explains the electric power steering light and warnings related to its illumination.
Explains the function of turn signal indicators and hazard warning lights.
Indicates when the vehicle's high beams are activated.
Describes the engine coolant temperature warning lights (red and blue) and their meanings.
Indicates when the rear fog light is operating.
Explains the function of the speedometer and the information display for fuel, odometer, and trip meter.
Explains how to view the odometer, trip meters, and adjust instrument panel brightness.
Details how to set up and customize functions within the TPMS setting mode.
Provides step-by-step instructions on how to navigate and use the vehicle's setting mode.
Explains the operation of the lighting control lever for turning lights on/off and switching beams.
Describes how to operate the vehicle's lights, including turning them on/off and using high/low beams.
Explains how the automatic light system operates based on the lighting switch and light sensor.
Details the four positions of the lighting control lever for operating lights.
Warns about covering the light sensor area, which can affect automatic light control.
Explains the conditions required for the auto-on headlight system to activate.
Describes the interior buzzer that alerts the driver if headlights or position lights are left on.
Explains how to turn the rear fog light on and the function of its indicator light.
Discusses adjusting the headlight pattern for right or left-hand traffic to avoid dazzling other drivers.
Provides instructions and dimensions for adjusting the headlight pattern by masking the lens for LHD vehicles.
Details the dimensions and marks for adjusting the left side headlight pattern.
Provides templates and dimensions for adjusting headlight patterns.
Explains how to use the headlight leveling switch based on vehicle load conditions.
Describes how to use the turn signal lever for activating right or left turn signals.
Explains how to activate hazard warning lights to alert other drivers of potential hazards.
Details the operation of the windshield wiper and washer lever, including automatic stop features.
Explains the different operating positions for the windshield wipers and how to turn them off.
Describes how to spray windshield washer fluid and a notice about using correct fluid.
Explains how to sound the horn by pressing the steering wheel button.
Discusses vehicle weight capacities, GVWR, axle weights, and proper cargo distribution.
Warns against overloading the vehicle and emphasizes securing cargo evenly to prevent injury or damage.
States that the vehicle is not designed for towing trailers.
Provides a checklist of daily inspections to perform before driving.
Explains normal engine oil consumption and factors influencing it.
Details pre-drive checks including windows, mirrors, lights, tyres, and fluid levels.
Discusses normal engine oil consumption, factors affecting it, and acceptable limits.
Describes the four positions of the ignition switch: LOCK, ACC, ON, and START.
Explains how to start the engine using the ignition switch and associated warnings.
Details how to set and release the parking brake lever and warnings related to its use.
Describes the parking brake reminder buzzer and its function.
Explains the function of the clutch pedal and provides warnings about its misuse.
Explains how the brake pedal operates the front and rear brakes and potential squealing noise.
Describes how the accelerator pedal controls engine speed and power output.
Provides instructions for starting the engine, including cold and warm conditions.
Explains how to start off and shift gears in a manual transmission vehicle.
Lists maximum allowable speeds for downshifting to prevent engine and transmission damage.
Explains how vehicle speed affects braking distance and advises on gradual braking.
Describes the operation of power-assisted brakes and actions during loss of power assistance.
Explains how the brake assist system provides additional braking power during emergency stops.
Explains how ABS electronically controls braking pressure to prevent skidding and maintain steering control.
Describes how the ABS computer monitors wheel speed and adjusts braking pressure to prevent wheel lock-up.
Explains how ESP helps control vehicle stability, traction, and prevent skidding by regulating engine output and brakes.
Describes how the stability control system integrates ABS, traction control, and engine control to prevent skidding.
Explains how traction control prevents wheel spin during acceleration on slippery surfaces.
Explains the ESP warning light, its activation, and what a continuous light indicates.
Describes the ESP OFF indicator light and when it is appropriate to turn the system off.
Details how to use the ESP OFF switch to manually turn off the ESP systems.
Explains the function of the TPMS in alerting the driver to low tyre pressure.
Describes the low tire pressure warning light and its role in notifying the driver of under-inflated tires.
Warns about the importance of correct tyre pressure, the limitations of TPMS, and actions for low pressure warnings.
Lists situations where the TPMS may not function properly and how to set initial tyre pressure values.
Provides recommendations for the first 960 km (600 miles) of vehicle operation to ensure engine longevity.
Explains the purpose of the catalytic converter and the importance of proper engine tuning and unleaded fuel.
Provides recommendations for the first 960 km (600 miles) of vehicle operation to ensure engine longevity.
Explains the purpose of the catalytic converter and the importance of proper engine tuning and unleaded fuel.
Offers advice on improving fuel economy through driving habits and vehicle maintenance.
Provides notices regarding catalytic converter care and avoiding potential damage.
Explains the importance of a clean air cleaner for engine performance and fuel consumption.
Advises on reducing vehicle weight to improve fuel economy.
Emphasizes maintaining correct tire pressure to improve fuel economy and reduce rolling resistance.
Provides advice for highway driving, including stopping distances and hydroplaning.
Offers guidance on driving uphill and downhill, including gear selection for braking.
Provides advice for driving on wet, icy, or muddy roads, emphasizing reduced speed and smooth maneuvers.
Offers instructions on how to free a vehicle stuck in snow, mud, or sand by rocking it.
Advises against driving in fields with grown grass due to accident or damage risks.
Provides precautions for off-road driving, including tyre specifications and brake testing after water exposure.
Advises caution when driving in flooded areas and recommends inspection of brakes and electrical components afterward.
Illustrates and describes the air outlets for the heating and air conditioning system in LHD vehicles.
Illustrates and describes the air outlets for the HVAC system in RHD vehicles.
Illustrates and describes the air outlets for the heating and air conditioning system in LHD vehicles.
Explains how to adjust the air outlet direction using the knob and case.
Describes the function of the temperature selector, blower speed selector, and air intake selector.
Explains the recirculated air mode, suitable for dusty conditions or quick climate control.
Explains the fresh air mode, which brings outside air into the cabin.
Details the functions selectable via the air flow selector, including VENTILATION and BI-LEVEL modes.
Describes the VENTILATION mode where temperature-controlled air comes from center and side outlets.
Describes the BI-LEVEL mode where air comes from floor and center/side outlets.
Describes the HEAT mode, where air comes from floor, side, and defroster outlets.
Describes HEAT & DEFROST mode, directing air to floor, windshield, and side outlets.
Describes DEFROST mode, directing air to windshield, side defroster, and side outlets.
Explains how to turn the air conditioning system on and off using the A/C switch.
Details instructions for natural ventilation, forced ventilation, normal heating, quick heating, and cooling.
Describes quick cooling using recirculated air and notes on window misting.
Explains how to use the AC for dehumidifying and clearing windows.
Provides guidance on periodic operation of the air conditioner to maintain its performance and durability.
Illustrates and describes the air outlets for the HVAC system in RHD vehicles.
Explains how to adjust the air outlet direction using the knob and case.
Describes the function of the temperature selector with AC switch and blower speed selector.
Provides guidance on periodic operation of the air conditioner to maintain its performance and durability.
Explains how to insert or pull out the radio antenna and precautions to avoid damage.
Refers to installation guidelines for radio frequency transmitting equipment.
Provides safety information regarding the audio system, including volume and attention to driving.
Illustrates and labels the basic operation buttons of the audio system.
Lists frequently used operations and their corresponding button presses for the audio system.
Explains various indicators that appear on the audio system display.
Guides the user through the audio system's setup menu, including setting the clock.
Details the process for accessing and adjusting initial settings for the audio system.
Explains how to receive preset stations, store best stations (BSM), and use manual seek tuning.
Provides instructions for connecting USB devices, iPods, and AUX devices to the audio system.
Refers to details on AOA connections for Android devices.
Explains MTP connection for Android devices and its limitations with file formats.
Describes how to connect and select AUX as an audio source.
Lists various operations for selecting folders, tracks, fast forwarding, and searching files.
Explains how to use the iPod link play mode to access songs by artist, album, or genre.
Details how to control iPod functions from the vehicle unit, including control modes.
Explains the MIXTRAX function for creating non-stop music mixes and its limitations.
Describes how to enjoy and control applications on an iPhone via the unit.
Lists basic operations for selecting tracks, fast forwarding, and pausing playback.
Introduces Spotify as a music streaming service and provides information on its usage.
Guides the user on how to connect their mobile device and listen to Spotify through the vehicle's audio system.
Lists basic operations for Spotify playback, including skipping tracks and searching.
Explains how to operate the vehicle unit using the Pioneer ARC APP on iPhone/Android devices.
Warns against operating the ARC APP while driving and advises to pull over safely.
Describes basic operations for listening to music on an Android device via the audio system.
Explains how to access and adjust various settings in the audio system's main menu.
Lists available function settings for the audio system, such as BSM, REGIONAL, LOCAL, and TA.
Lists function settings for the audio system, including AF, NEWS, ALARM, SEEK, SAVE, UNSAVE, and S.RTRV.
Details audio settings for FADER, BALANCE, and EQ SETTING to customize sound.
Continues detailing audio settings, including LOUDNESS, BASS BOOST, HPF SETTING, and SLA.
Lists system settings for the audio unit, such as clock, time notation, AUTO PI, AUX, SPOTIFY, and ANDROID WIRED.
Explains how to adjust the display brightness of the audio system.
Details settings for the MIXTRAX function, including playback time and special effects.
Provides troubleshooting guidance for common problems with the audio system's display and playback.
Lists common error messages for the audio system and their possible causes and solutions.
Lists error messages related to USB devices and iPods connected to the audio system.
Lists further error messages for iPod, APP, and Spotify, along with their solutions.
Provides guidelines for handling USB storage devices and iPods, including compatibility and temperature precautions.
Details compatibility information for WMA and MP3 audio files, including bit rates and sampling frequencies.
Specifies compatibility for WAV file formats and quantization bits.
Lists compatible iPod models and software versions, along with usage notes.
Explains that audio file sequence depends on the connected device and notes hidden files in USB.
Lists copyright and trademark information for various software and brands used in the system.
Provides instructions on how to remove and install the fuel filler cap, including CAUTION about fuel pressure.
Details how to open the engine compartment for LHD vehicles, involving seat adjustments.
Warns about pinching hands when sliding the driver's seat rearward.
Explains how to access the engine compartment for RHD vehicles, including seat and carpet manipulation.
Describes how to operate the seat lock handle.
Provides notices regarding closing the engine compartment and storing straps.
Explains how to use the sun visor to block glare from the windshield or side window.
Describes the two positions of the interior light switch: ON and OFF.
Explains how to use the accessory socket for powering 12V accessories and provides notices about electrical system safety.
Explains the function of the ride-in assist grip for support when entering or exiting the vehicle.
Illustrates and lists various storage areas in the vehicle, including cup holders and instrument panel boxes.
Provides warnings and precautions for using the cup holder, especially with hot liquids or sharp objects.
Describes the use of instrument panel storage boxes and provides warnings about their contents.
Explains the use of the instrument panel centre box for keeping small items and provides warnings about its contents.
Describes the use of small storage boxes located on the driver's and passenger's sides.
Explains the purpose and limitations of the frame hook, advising against using it for towing other vehicles.
Provides notices regarding the proper use of the frame hook to avoid damage or injury.
Outlines the regular maintenance schedule for the vehicle based on mileage and time intervals.
Provides a detailed periodic maintenance schedule, indicating inspections, adjustments, and replacements.
Emphasizes extreme care when working on the vehicle, including airbag system precautions and avoiding hazardous areas.
Outlines the regular maintenance schedule for the vehicle based on mileage and time intervals.
Recommends Suzuki dealer for certain maintenance items and provides guidance for DIY tasks.
Presents the periodic maintenance schedule for engine, ignition, fuel, and emission control systems.
Continues the periodic maintenance schedule, covering engine, ignition, fuel, and emission control systems.
Presents the periodic maintenance schedule for brake and chassis/body components.
Continues the periodic maintenance schedule for brake and chassis/body components.
Lists conditions that constitute severe driving and recommend following a more frequent maintenance schedule.
Provides a periodic maintenance schedule tailored for severe driving conditions.
Continues the periodic maintenance schedule for severe driving conditions.
Continues the periodic maintenance schedule for severe driving conditions, covering brake and chassis components.
Continues the periodic maintenance schedule for severe driving conditions, covering brake and chassis components.
Explains how to check drive belt tension and deflection, and when to replace or adjust it.
Recommends specific engine oil types and grades based on temperature and quality classifications.
Provides instructions on how to check the engine oil level correctly using the dipstick.
Guides the user on how to refill engine oil, including precautions against overfilling.
Details the procedure for draining engine oil and replacing the oil filter, including safety warnings.
Provides step-by-step instructions for removing and installing the oil filter, including tightening torque.
Advises on using genuine SUZUKI replacement filters and checking for oil leakage.
Recommends using SUZUKI genuine coolant or equivalent for optimal engine performance and protection.
Explains how to check the coolant level in the reservoir tank and add coolant if necessary.
States that coolant replacement requires special procedures and should be done by a dealer or workshop.
Explains the importance of the air cleaner and how to inspect or replace its element.
Guides on inspecting spark plugs for carbon deposits, adjusting gap, and replacing them correctly.
Recommends specific gear oils for manual transmission and differential based on viscosity and grade.
Provides instructions for checking gear oil levels in the manual transmission and rear differential.
Details how to check and refill the rear differential oil, including tightening torque.
States that gear oil changes require special procedures and should be performed by a dealer or workshop.
Explains how to measure clutch pedal play and the importance of proper adjustment.
Describes how to check the brake fluid level in the reservoir and the meaning of MAX/MIN lines.
Provides warnings and notices regarding brake fluid level, type, and handling.
Explains how to check the brake pedal's stopping height and minimum distance, and warns about worn brake pads.
Details how to check the parking brake adjustment by counting ratchet clicks and warns about poor performance.
Specifies the minimum thickness for brake discs and maximum inner diameter for brake drums.
Explains how to check steering wheel play and ensure smooth, rattle-free operation.
States that front and rear tyre pressure specifications are listed on the vehicle's information label.
Outlines steps for inspecting tyres, including air pressure, tread depth, wear, cracks, loose nuts, and foreign objects.
Warns that hitting curbs can damage tyres and affect wheel alignment.
Emphasizes using approved tyre types and sizes and warns about the impact of aftermarket wheels on handling.
Recommends rotating tyres every 10,000 km (6,000 miles) to ensure even wear and prolong their life.
Provides warnings about battery hazards and instructions for checking battery terminals and fluid levels.
Details the procedure for removing the battery, including disconnecting cables and removing the bracket.
Explains the meaning of the crossed-out bin symbol and the "Pb" chemical symbol on the battery label.
Advises waiting after turning off the ignition before disconnecting the battery.
Describes the three types of fuses (main, primary, individual) and how to remove them using a fuse puller.
Illustrates the locations of relay boxes containing fuses in the engine compartment.
Lists the main and primary fuses with their amperage and the components they protect.
Explains the location of fuses under the instrument panel and provides a warning about using correct fuse amperage.
Lists primary fuses for vehicles without automatic light operation and for vehicles with automatic light operation.
Warns against using incorrect fuse amperage or substitutes, and advises immediate inspection if a fuse blows repeatedly.
States that headlight aiming requires special procedures and should be done by a dealer or workshop.
Provides cautions regarding hot bulbs, pressurized halogen gas, and handling bulbs safely.
Details the steps for removing and installing headlight bulbs, including disconnecting couplers and springs.
Warns about potential damage to the wiring harness and fire risk if not installed correctly.
Advises against touching aiming screws and suggests inspection after bulb replacement.
Explains how to replace bulbs for front turn signal and position lights.
Describes how to remove the bulb holder for front turn signal and position lights.
Explains how to disconnect the coupler and remove the bulb holder for Daytime Running Lights.
Details how to remove the cover and replace bulbs for turn signal, tail/brake, and reversing lights.
Explains how to remove the rear fog light housing and replace the bulb.
Provides instructions for removing the cover and replacing the license plate light bulb.
Details how to remove the housing and replace the bulb for the high-mount stop light.
Explains how to remove the lens and replace the interior light bulb.
Advises on replacing wiper blades if they become brittle, damaged, or streak, and outlines installation procedures.
Notes that wiper blade designs may vary and recommends consulting a dealer for specific replacement methods.
Warns against scratching or breaking the window while replacing wiper blades.
Explains how to move metal retainers from an old blade to a new one and ensure proper installation.
Instructs on checking the windshield washer fluid level and refilling it with appropriate fluid.
Recommends periodic operation of the air conditioner to maintain its performance and durability.
A section for user notes and reminders.
Lists the tools provided for changing a tyre, including the jack, wheel wrench, and jack handle.
Provides instructions for safely jacking up the vehicle, including setting the parking brake and blocking wheels.
Illustrates the location of the jack, wheel wrench, and jack handle for left and right-hand drive vehicles.
Details the procedure for removing and stowing the jack, including seat adjustments and clip removal.
Explains how to remove the spare tyre from under the vehicle, including loosening the hook nut.
Provides instructions for installing the spare tyre and tightening the hook nut.
Specifies the tightening torque for the spare tyre holder hook nut.
Details safe jacking procedures, including vehicle positioning, parking brake, hazard lights, wheel blocking, and handle assembly.
Explains how to position the jack vertically and raise it to the jacking point.
Describes how to continue raising the jack slowly until the tyre clears the ground.
Provides critical warnings about using the jack only on level ground, at specified points, and never getting under the vehicle.
Warns against positioning the jack on the engine mount member to avoid damage.
Explains how to apply a garage jack to specific points and support the raised vehicle with jack stands.
Advises against applying a garage jack to the exhaust pipe, engine undercover, or rear torsion beam.
Outlines the procedure for changing a wheel, including loosening nuts, jacking, and removing wheel nuts.
Specifies the tightening torque for wheel nuts after changing wheels.
Provides warnings about jump-starting, including battery hazards and proper connection procedures.
Details the procedure for jump-starting a vehicle using another vehicle's battery, including connection steps and warnings.
Provides a step-by-step guide on how to connect jump leads between two batteries.
Advises contacting professional towing services and provides basic towing instructions.
Guides on troubleshooting when the starter motor does not operate, checking battery and fuses.
Provides steps to take if the engine does not start, including checking fuel and battery.
Explains what to do if the engine overheats, including checking coolant and belts, and steam precautions.
Provides warnings related to engine overheating, including steam hazards and fan safety.
A section for user notes and reminders.
Highlights the importance of preventing vehicle corrosion and lists instructions for maintenance.
Covers vehicle cleaning as part of appearance care and lists related sections.
Provides instructions on how to maintain the vehicle to prevent corrosion, including washing and environmental factors.
Lists common causes of corrosion, such as road salt and damage to paint.
Advises on examining painted surfaces for damage and touching up chips or scratches to prevent corrosion.
Emphasizes keeping interior compartments clean to prevent corrosion caused by moisture or cargo.
Recommends storing the vehicle in a dry, well-ventilated area to prevent corrosion.
Provides instructions on how to wash the vehicle by hand, including precautions and using mild detergents.
Guides on cleaning vinyl upholstery, fabric upholstery, seat belts, and instrument panels.
Describes the process for cleaning vinyl upholstery using soap and water.
Provides instructions for washing the vehicle's exterior by hand, including flushing, rinsing, and drying.
Details the steps for hand washing the vehicle, including using pressurized water and avoiding harsh materials.
Advises ensuring vehicle parts are secure before using an automatic car wash.
Warns about using high-pressure cleaners carefully to avoid vehicle damage.
Recommends waxing and polishing the vehicle after washing to protect and enhance the paint finish.
Indicates where to find vehicle identification details like chassis and engine serial numbers.
Provides information on recommended fuel types and octane ratings for the vehicle.
Explains how to locate the chassis serial number for vehicle registration and service.
Shows the location of the engine serial number on the cylinder block.
Specifies unleaded gasoline requirements for the gasoline engine, including octane rating and ethanol blends.
Warns about fuel expansion in hot weather and potential leakage if overfilled.
Lists vehicle dimensions such as overall length, width, height, wheelbase, track, and ground clearance.
Details engine specifications including type, cylinders, bore, stroke, displacement, and compression ratio.
Lists electrical specifications such as standard spark plug type, battery, and fuse information.
Provides a table of vehicle lights, their wattage, and bulb numbers.
Lists tyre size, rim size, and tyre pressure information.
Lists approximate capacities for coolant, fuel tank, engine oil, transmission oil, and differential oil.
A section for user notes and reminders.
Provides supplementary information specific to Argentina models.
Provides supplementary information specific to GCC Countries models.
Details fuel recommendations, including unleaded gasoline and ethanol blends, specific to Argentina.
Provides a notice regarding fuel expansion in hot weather for Argentina models.
Lists technical data and airbag symbol meanings relevant to GCC Countries.
Explains how to locate the chassis serial number for GCC Countries' models.
Shows the airbag symbol meaning found on the sun visor for Taiwan models.
Details fuel recommendations for Thailand, including unleaded gasoline and ethanol blends.
Lists vehicle specifications, including dimensions and mass, for Pakistan models.
Lists index entries from Accelerator Pedal to ESP® OFF Indicator Light.
Lists index entries from ESP® OFF Switch to Low Tyre Pressure Warning Light.
Lists index entries from Main Beam to Supplemental Restraint System.
Lists index entries from Tail/Brake Light to Wiper Blades.
General