44
3. Make sure lock plate 3 is in position.
4. Turn the emergency key to “ON & OFF” posi-
tion, and then release it to the “PUSH
START/STOP” position. The buzzer emits
one (1) long sound and five (5) short sounds.
5. Pull out the emergency stop switch lock
plate.
ON & OFF ON & OFF
PUSH
START
STOP
PUSH
START
STOP
6. Turn the emergency key to the “ON & OFF”
position and hold it until the buzzer sounds.
Turn the emergency key back to the “PUSH
START/STOP” position. The system turns to
stand-by state for passcode input.
7. Take the following steps to enter the pass-
code.
(1)Turn the main switch to the “ON & OFF”
position and then release it. The main switch
automatically returns to the “PUSH START/
STOP” position.
(2)The buzzer starts emitting short sounds.
When the buzzer sounds for the same num-
ber of times as the 1st digit of the passcode,
immediately turn the emergency key to the
“ON & OFF” position, and release it to the
“PUSH START/STOP” position.
To enter “0” in the passcode, turn the switch
after the buzzer sounds 10 times.
ON & OFF ON & OFF
PUSH
START
STOP
PUSH
START
STOP
ON & OFF ON & OFF
PUSH
START
STOP
PUSH
START
STOP
1234567891011
Example: When entering 7
ON & OFF ON & OFF
PUSH
START
STOP
PUSH
START
STOP