3
IMPORTANT
WARNING/CAUTION/NOTE
Please read this manual and follow its instructions carefully. To emphasize special information, the symbol
and the words WARNING, CAUTION and NOTE have special meanings. Pay special attention to the
messages highlighted by these signal words.
NOTE:
Indicates special information to make maintenance easier or instructions clearer.
Please note, however, that the warnings and cautions contained in this manual cannot possibly cover all
potential hazards relating to the servicing, or lack of servicing, of the outboard motor. In addition to the
WARNINGS and CAUTIONS stated, you must use good judgement and basic mechanical safety principles.
SYMBOL
Listed in the table below are symbols indicating special instructions and other important information neces-
sary for proper servicing. Please note the definition for each symbol. You will find these symbols used
throughout this manual. Refer back to this table if you are not sure of any symbol(s) meanings.
MATERIALS REQUIRED
Indicates a potential hazard that could result in death or injury.
Indicates a potential hazard that could result in motor damage.
SYMBOL DEFINITION SYMBOL DEFINITION
Torque control required.
Data beside it indicates specified
torque.
Apply THREAD LOCK “1342”.
Apply SUZUKI WATER RESISTANT
GREASE.
Use special tool.
Apply SUZUKI SILICONE SEAL.
WATER RESISTANT
GREASE
SUZUKI SILICONE
SEAL
99000-25161
(250 g/8.8 oz)
99000-31120
(50 g/1.7 oz)
To Next Page
