7-49
3. Move the instrument panel to
the arrowed direction.
4. Pull out the hook.
5. To install the instrument panel
assembly, reverse the com-
plete sequence listed.
Headlight
High beam bulb
1. Disconnect the coupler 1.
Turn the socket 2 counter-
clockwise and remove it.
2. Pull off the bulb 3 from the
socket.
NOTICE
The headlight bulb’s life may
be shortened by oil from your
fingers if you touch it.
When replacing the headlight
bulb, be careful not to touch
the glass. Grasp the new bulb
with a clean cloth.
To Next Page
Loading...
Need help?
General
