3-32
REAR BRAKE PEDAL
Depressing the rear brake pedal
will apply the rear disk brake. The
brake light will be illuminated
when the rear brake is operated.
SEAT LOCK
To remove the seat, insert the
ignition key into the lock and turn
it clockwise. Raise the rear end of
the seat and slide it backward.
To reinstall the seat, slide the seat
hooks into the seat hook retainers
and push down firmly until the
seat snaps into the locked posi-
tion.
WARNING
Failure to install the seat prop-
erly could allow the seat to
move and cause loss of rider
control.
Latch the seat securely in its
proper position.
To Next Page
Loading...
Need help?
General
