3-23
Mode Switch 3
Use the MODE SWITCH to
change the speedometer display
setting and traction control sys-
tem setting.
Refer to the INSTRUMENT
PANEL and TRACTION CON-
TROL SYSTEM sections for
details.
NOTE: For more detailed informa-
tion on the traction control sys-
tem, see page 3-24.
Horn Switch “
” 4
Press the switch to sound the
horn.
Turn Signal Light Switch “
”
5
Moving the switch to the “
” posi-
tion will flash the left turn signals.
Moving the switch to the “
” posi-
tion will flash the right turn sig-
nals. The indicator light will also
flash intermittently. To cancel turn
signal operation, push the switch
in.
WARNING
Failure to use the turn signals,
and failure to turn off the turn
signals can be hazardous.
Other drivers may misjudge
your course and this may
result in an accident.
Always use the turn signals
when you intend to change
lanes or make a turn. Be sure
to turn off the turn signals after
completing the turn or lane
change.
To Next Page
Loading...
Need help?
General
