Need help?Do you have a question about the Suzuki FU150 2023 and is the answer not in the manual?
General| Displacement | 147.3 cc |
|---|---|
| Bore x Stroke | 62.0 mm x 48.8 mm |
| Fuel System | Carburetor |
| Ignition | CDI |
| Final Drive | Chain |
| Front Suspension | Telescopic, Coil Spring, Oil Damped |
| Rear Suspension | Swingarm, Coil Spring, Oil Damped |
| Front Brake | Disc |
| Rear Brake | Drum |
| Width | 745 mm |
| Wheelbase | 1, 285 mm |
| Ground Clearance | 160 mm |
| Max Torque | 13.8 Nm @ 6, 000 rpm |
| Length | 2020 mm |
| Height | 1, 045 mm |
| Fuel Capacity | 11 liters |
| Transmission | 5-Speed |
Explains the meaning of warning, caution, and note symbols used in the manual.
Guidelines for safely installing accessories on the motorcycle.
Information on modifying the motorcycle and its potential risks.
Essential safety advice and precautions for motorcycle riders.
Details on the location of the frame and engine serial numbers.
Identifies and labels various parts of the motorcycle.
Information about the motorcycle's ignition keys and their importance.
Explains the function and operation of the ignition switch.
Details the functions of the tachometer, fuel meter, and indicator lights.
Describes controls located on the left handlebar, like clutch and dimmer switch.
Details controls on the right handlebar, including throttle and starter.
Instructions on how to open and close the fuel tank cap.
Information on the kick starter lever and its operation.
Explains the 6-speed transmission and gear shifting procedure.
How to operate the rear brake pedal and its function.
Instructions for unlocking the seat and using helmet holders.
Details on using the center stand and side stand for parking.
Specifies recommended gasoline types and octane ratings for the motorcycle.
Recommends specific types and viscosities of engine oil for optimal performance.
Guidelines for the initial break-in period to ensure engine longevity.
Instructions for breaking in new tires for optimal grip and safety.
Essential pre-ride checks to ensure the motorcycle is safe to operate.
Step-by-step instructions for starting the motorcycle's engine.
Guidance on how to begin riding the motorcycle smoothly.
Advice on proper gear selection and clutch usage for smooth riding.
Procedures for safely stopping and parking the motorcycle.
Tips for riding on inclines, including gear selection for climbing and descending.
Outlines intervals for periodic inspections, lubrication, and servicing.
Lists the tools provided or recommended for motorcycle maintenance.
Identifies key points on the motorcycle that require regular lubrication.
Information on battery maintenance, removal, installation, and disposal.
Guidance on spark plug inspection, replacement, and gap adjustment.
Instructions for checking and cleaning or replacing the air cleaner element.
Procedure for adjusting the engine's idle speed for optimal operation.
How to adjust the throttle cable play for safe and responsive operation.
Steps for removing body panels for access to internal components.
Instructions for inspecting fuel hoses for damage or leakage.
Details on adjusting clutch cable play for proper clutch engagement.
Procedures for checking and changing engine oil and oil filter.
Guidance on inspecting, cleaning, oiling, and adjusting the drive chain.
Instructions for inspecting brake fluid, hoses, and pads for proper function.
How to inspect brake pads for wear and when to replace them.
Procedure for adjusting the rear brake pedal position.
Information on tire condition, pressure, type, and break-in.
Recommended tire pressures for different riding conditions and load capacities.
Procedures for replacing various light bulbs on the motorcycle.
Steps for replacing headlight, turn signal, and position light bulbs.
Steps to diagnose issues related to the fuel supply and carburetor.
Procedure for checking the ignition system for spark issues.
Common causes and checks for engine stalling problems.
Guidelines for washing and cleaning the motorcycle.
Recommendations for waxing and polishing to protect the paint finish.
Instructions for preparing the motorcycle for long-term storage.
Steps to take when bringing a stored motorcycle back into service.
Methods to prevent corrosion and protect the motorcycle's finish.
Technical specifications for the motorcycle's physical dimensions and weight.
Detailed specifications for the motorcycle's engine components and performance.
Specifications related to the clutch, transmission, and drive chain.
Specifications for the motorcycle's frame, suspension, and wheels.
Specifications for the motorcycle's electrical system components.
Information on fluid capacities such as fuel tank and engine oil.
Details the warranty period and what is covered for all motorcycle models.
Lists parts that are not covered under the warranty terms.
Outlines conditions and usage that void the motorcycle warranty.
A logbook for recording periodic maintenance and service history.
To Next Page
