Need help?Do you have a question about the Suzuki FZ50 T 1980 and is the answer not in the manual?
General| Displacement | 49 cc |
|---|---|
| Fuel System | Carburetor |
| Starting System | Kick start |
| Transmission | 3-speed manual |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swingarm |
| Front Brake | Drum |
| Rear Brake | Drum |
| Front Tire | 2.25-17 |
| Rear Tire | 2.25-17 |
| Engine Type | 2-stroke, single cylinder |
| Bore x Stroke | 41.0 mm x 37.4 mm |
| Height | 950 mm |
| Fuel Capacity | 3.5 L |
Detailed measurements and weight specifications for the motorcycle.
Technical details of the engine, including type, bore, stroke, and displacement.
Information on clutch, transmission type, gear ratios, and drive chain.
Details on front/rear suspension, steering, brakes, and tires.
Information on ignition, spark plug, battery, generator, and fuse.
Fuel tank, engine oil, and transmission oil capacities.
Wiring diagram illustrating the PEI ignition system connections.
Procedure to check stator resistance using a pocket tester.
Method to test ignition coil resistance with a pocket tester.
Tools for inspecting the PEI unit, including pocket tester usage.
Schematic illustration of electrical wire placement on the motorcycle.
Service specifications for connecting rod and crankshaft components.
Service data for the oil pump, including reduction ratio.
Service data for clutch components like wheel, shoes, engagement, and spring length.
Service data for transmission ratios and shift fork thickness.
Specifications for the drive chain, including type and pitch length.
Detailed specifications for the Mikuni VM 14SH carburetor.
Resistance values for ignition coil and magneto coils.
Specifications for charging rate and lighting coil output.
Details on battery type, capacity, and fuse rating.
Measurements for brake lever distance and brake drum internal diameter.
Specifications for wheel rim runout, axle runout, tire size, and tread depth.
Specifications for engine mounting and swing arm pivot shaft runout.
Details on recommended fuel type and fuel tank capacity.
Recommended engine and transmission oil types and capacities.
Cold inflation tire pressure for normal and solo riding.
Wattage ratings for headlight, tail/brake light, and indicator lights.
Procedure to test ignition coil resistance using a pocket tester.
Method to check conductivity of the turn signal switch.
Service specifications for cylinder bore, piston diam., and rings.
Service specifications for conrod and crankshaft components.
Service data for oil pump and clutch.
Service data for transmission ratios and drive chain.
Resistance values for ignition coil and magneto coils.
Specifications for charging rate and lighting coil output.
Details on battery type, capacity, and fuse rating.
Measurements for brake lever distance and brake drum internal diameter.
Specifications for wheel rim runout, axle runout, tire size, and tread depth.
Details on recommended fuel type and fuel tank capacity.
Recommended engine and transmission oil types and capacities.
Cold inflation tire pressure for normal and solo riding.
Wattage ratings for headlight, tail/brake light, and indicator lights.
To Next Page
