Need help?Do you have a question about the Suzuki GS1100 1980 and is the answer not in the manual?
General| Displacement | 1074 cc |
|---|---|
| Bore x Stroke | 72.0 mm x 66.0 mm |
| Compression Ratio | 9.5:1 |
| Cooling System | Air-cooled |
| Ignition | Electronic ignition |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Brakes | Dual disc |
| Rear Brakes | Single disc |
| Front Tire | 3.50-19 |
| Rear Tire | 4.50-17 |
| Seat Height | 800 mm |
| Engine Type | 4-stroke, DOHC |
| Front Suspension | Telescopic fork |
| Rear Suspension | Dual shocks |
| Wheelbase | 1520 mm |
| Top Speed | 220 km/h |
| Fuel Capacity | 22 liters |
Outlines essential precautions for disassembly, reassembly, and handling of parts.
Details standard and limit specifications for valve diameter, lift, and clearance.
Lists critical engine component torque values for proper assembly.
Specifies torque values for various chassis fasteners and components.
Outlines recommended service intervals for key maintenance tasks.
Diagnoses common engine complaints and their possible causes and remedies.
Addresses issues related to electrical systems, including sparking and charging.
Provides step-by-step procedures for engine removal and reinstallation.
Lists detailed specifications for the carburetor type and its components.
Illustrates the front fork construction and provides disassembly procedures.
Explains the operation and inspection of the ignition system.
Describes the AC generator, regulator/rectifier, and battery charging circuit.
Details the starter motor, relay, and switch operation and inspection.
Lists dimensions, weights, and technical specifications for the GS1100ED/ESD.
To Next Page
