2-6
“ON” POSITION
The ignition circuit is completed and the
engine can now be started. The headlight
and taillight will automatically be turned on
when the key is in this position. The key can-
not be removed from the ignition switch in
this position.
NOTE: Start the engine promptly after turn-
ing the key to the “ON” position, or the bat-
tery will lose power due to consumption by
the headlight and taillight.
“P” (Parking) POSITION
When parking the motorcycle, lock the
steering and turn the key to the “P” position.
The key can now be removed and the posi-
tion light (if equipped) and taillight will
remain lit. This position is for night time
roadside parking to increase visibility.
WARNING
If the motorcycle falls down due to a slip
or collision, unexpected damage to the
motorcycle could cause the engine to
keep running, which could result in a
fire, or could result in injury from moving
parts such as the rear wheel.
If the motorcycle falls down, turn the
ignition switch off immediately. Ask your
authorized Suzuki dealer to inspect the
motorcycle for unseen damage.
To Next Page
Loading...
