2-17
Trip Meters
The two trip meters are resettable odome-
ters. They can register two kinds of dis-
tances at the same time. For instance, trip
meter A can register the trip distance and
trip meter B can register the distance
between fuel stops.
To reset a trip meter to zero, push the button
9 for 2 seconds while the display indicates
the trip meter A, or B, you want to reset.
NOTE: When the trip meter exceeds 9999.9,
the trip meter will return to 0.0 and start
counting again.
NOTE: The trip meter will be reset to zero
when the battery is removed or battery is
discharged.
Instrument Panel Light Brightness
Pushing the button 9 will change the instru-
ment panel light brightness in 6 steps. The
brightness indicator indicates brightness
from “” (min) to “” (max).
Gear Position Indicator
The gear position indicator indicates gear
position. This indicator displays “0” when the
transmission is in neutral.
NOTE: When the display indicates “CHEC”
in the odometer display area, the gear posi-
tion indicator does not indicate a number but
indicates “–”.
To Next Page
Loading...
