Suzuki Jimny User Manual

3-23
OPERATING YOUR VEHICLE
78RB1-01E
Setting cruising speed
Cruise control switch
52RM30190
(1) Cruise switch
(2) “CANCEL” switch
(3) “RES +/SET –” switch
Instrument cluster (Type A)
75RM329
(4) Cruise indicator light
(5) “SET” indicator light
Instrument cluster (Type B)
78RB03029
(6) Cruise indicator
(7) Set indicator
1) Turn on the cruise control system by
pushing cruise switch (1). When the
cruise indicator light (4) (type A) or
cruise indicator (6) (type B) comes on,
you can set cruising speed.
2) Accelerate or decelerate to the desired
speed.
3) Push down the “RES +/SET –” switch
(3) and turn on the “SET” indicator light
(5) (type A) or set indicator (7) (type B).
Take your foot off the accelerator pedal
and the set speed will be maintained.
Changing speed temporarily
When the cruising speed is maintained, you
can temporarily accelerate or decelerate.
To accelerate, depress the accelerator
pedal. When you take your foot off the pedal,
your vehicle will return to the set speed.
To decelerate, depress the brake pedal.
The set speed will be canceled and “SET”
indicator light (5) or set indicator (7) will go
off.
To resume the previously set speed, push
up the “RES +/SET –” switch (3) and turn
on “SET” indicator light (5) or set indicator
(7) again when vehicle speed is above 40
km/h (25 mph). The vehicle will accelerate
to the previously set speed and maintain
its speed.
(1)
(2)
(3)
(4) (5)
WARNING
If the cruising speed is set by acci-
dent, you cannot decelerate or could
loose control of the vehicle. This
could lead to an accident, resulting in
severe injury or death.
Turn off the cruise control system
and check that cruise indicator (6) is
off when the system is not in use.
(6) (7)

Suzuki Jimny Specifications

General

Brand	Suzuki
Model	Jimny
Category	Automobile
Language	English