25
SPEEDOMETER
Set the meter to odometer, then press and hold func-
tion change button for 2 seconds to switch the display.
Select km/h or mph properly to comply with traffic reg-
ulations.
Check km/h and mph display after adjusting the instru-
ment panel display.
A: Function change button
B: Speedometer display (km/h,mph)
Test ride the vehicle checking all mechanical functions.
Tighten all nuts, bolts, and miscellaneous mounting
parts to the proper torque specs.
Confirm that all cables and wiring harnesses are con-
nected and routed correctly.
To Next Page
Loading...
