26
TIGHTENING TORQUE
TIGHTENING TORQUE LIST
Each bolts and nuts should be tightened to the torque specified in “TIGHTENING TORQUE LIST”.
If no description or specification is provided, refer to the “TIGHTENING TORQUE CHART” on next page.
Item Part Name N·m kgf-m
STEERING, FRONT SUSPENSION AND FRONT BRAKE
A Handlebar clamp bolt 26 2.6
B Front hub nut 110 11.0
C Front wheel set nut 60 6.0
D Front brake caliper air bleeder 6.0 0.60
E
Front shock absorber mounting bolt
(upper)
55 5.5
F
Front shock absorber mounting bolt
(lower)
60 6.0
G
Front brake master cylinder mounting
bolt
10 1.0
H Front brake caliper mounting bolt 26 2.6
I Front suspension arm pivot nut 65 6.5
Item Part Name N·m kgf-m
REAR SUSPENSION AND REAR BRAKE
J
Rear shock absorber mounting nut
(upper)
35 3.5
K
Rear shock absorber mounting nut
(lower)
60 6.0
L Rear hub nut 121 12.1
M Rear wheel set nut 60 6.0
N Rear brake cam lever nut 11 1.1
OTHERS
O Footrest bolt 55 5.5
P Rear swingarm pivot nut 102 10.2
Q Rear axle housing nut 60 6.0
R Rear axle housing bolt 55 5.5
S Rear brake pedal boss nut 12 1.2
T Rear brake anchor panel bolt 32 3.2
To Next Page
Loading...
