Starting System: 1I-5
Specifications
Service Data (LT-A750XP/ZK9)
B931G31907003
Unit: mm (in)
Tightening Torque Specifications
B931G31907004
NOTE
The specified tightening torque is described in the following.
“Starter Motor Components (LT-A750XP/ZK9) (Page 1I-1)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List (LT-A750XP/ZK9) in
Section 0C (Page 0C-7)”.
Special Tools and Equipment
Recommended Service Material
B931G31908001
NOTE
Required service material is also described in the following.
“Starter Motor Components (LT-A750XP/ZK9) (Page 1I-1)”
Special Tool
B931G31908002
Item Specification Note
Starter motor brush length
Standard 12.0 (0.47)
Limit 6.5 (0.26)
Starter torque limiter slip torque Standard
41.2 – 62.8 N⋅m
(4.2 – 6.4 kgf-m, 14.5 – 32.5 lbf-ft)
Starter relay resistance 3 – 5 Ω
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Starter motor mounting bolt 10 1.0 7.0 )(Page 1I-2)
Starter motor lead wire mounting nut 6 0.6 4.5 )(Page 1I-2)
Starter motor housing bolt 5 0.5 3.5 )(Page 1I-3)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE “A” or
equivalent
P/No.: 99000–25010 )(Page 1I-2) / )(Page 1I-2)
Moly paste SUZUKI Moly paste or equivalent P/No.: 99000–25140 )(Page 1I-3)
09900–20102 09900–25008
Vernier calipers (200 mm) Multi circuit tester set
)(Page 1I-3) )(Page 1I-4)
To Next Page
Loading...
