Suzuki Samurai 1986 User Manual

2) Using spring pin remover (special tool), drive
2 spring pins out of front drive shift shaft
@ and reduction shift shaft 0.
Spring pin remover @ : (09922-85811).
Fig. 14-24
3) Remove forks and shift shafts.
NOTE:
At this time, locating ball and spring will jump
out of hole, use care not to lose them.
Fig. 14-25
4) Hammer output rear shaft with a plastic
hammer to drive it out of center case.
5) Pull out counter gear,
Remove counter shaft
loosening counter shaft
bearings and spacer.
from center case by
lock plate bolt.
Fig. 14-27
6) Remove input shaft from center case by
hammering thick part of case or input
shaft center with a plastic hammer.
Fig. 14-28
14-10
Fig. 14-26

Suzuki Samurai 1986 Specifications

General

Brand	Suzuki
Model	Samurai 1986
Category	Automobile
Language	English