Need help?Do you have a question about the Suzuki SLDA and is the answer not in the manual?
General| Touchscreen | Yes |
|---|---|
| Navigation | Yes |
| Apple CarPlay | Yes |
| Android Auto | Yes |
| Bluetooth | Yes |
| USB | Yes |
| Resolution | 800x480 pixels |
| Compatibility | Suzuki vehicles |
| Display Size | 7 inch |
| USB Port | Yes |
Explains short and long tap functions for power and standby modes.
Identifies the display screen and the SD card slot.
Describes the button used to access the main Home menu.
Details the button used to activate the voice control feature.
Explains how to access sound/system settings and the Home menu.
Describes the control for adjusting the system's volume.
Lists supported features like radio, USB, Bluetooth, navigation, etc.
Explains the meaning of warning, note, and formatting symbols used in the manual.
Emphasizes safe device operation while driving and adherence to traffic regulations.
Warns against disassembling the device due to shock and fire risks.
Instructs users to stop using the device if malfunctions occur to prevent accidents.
Provides guidelines for cleaning the device without causing damage.
Explains fundamental touchscreen interactions like tapping, swiping, and zooming.
Details how to zoom in and out on the map view using two fingers.
Covers turning the device on/off and entering/exiting standby mode.
Explains incremental and continuous volume adjustment and muting the device.
Introduces the Home menu and its access to Listen, Call, Drive, and Connect modes.
Details how to call up the display for each main operating mode (Listen, Call, Drive, Connect).
Explains how to directly select functions from the Home menu screen areas.
Describes accessing further functions via the quick-access wheel in the Home menu.
Shows information displayed for FM tuner and USB media playback.
How to switch between different main operating mode displays on the screen.
Explains the setting to disable keypad input while the vehicle is moving.
Details the procedure for entering the device's security PIN.
How changes to keypad lock affect active Apple CarPlay sessions.
Adjusting bass, treble, balance, and fader for sound output.
Choosing from predefined equalizer settings for audio playback.
Automatic volume adjustment based on vehicle speed.
Setting volume levels for external DVD and AUX sources.
Enabling or disabling audible confirmation beeps for system actions.
Setting the display format for dates within the system.
Setting the display format for time (12-hour or 24-hour).
Synchronizing the device's time with GPS signals.
Manually adjusting the hours and minutes for the device's time.
Controls for adjusting the brightness of the device's display.
Choosing the display language for the device's interface.
Selecting between metric and imperial units for navigation.
Guides on activating, deactivating, and confirming the security PIN.
Resets all user-defined settings to their original factory state.
Instructions for connecting and using USB storage devices and SD cards.
How to enable the AUX input for audio playback.
Enabling the external DVD input for video playback.
General information on connecting Bluetooth devices like phones and audio players.
How to access the list of paired devices and initiate pairing.
Step-by-step guide to pairing a new mobile phone via Bluetooth.
Provides insights into AM and FM signal quality and potential interference.
How to access and start listening to the radio via the Home menu.
Identifies controls and information shown on the tuner display.
Explains the Radio Data System (RDS) and its impact on station information.
Details manual frequency adjustment and automatic seek tuning.
How to scan and briefly listen to receivable stations.
Manually or automatically storing stations and listening to them later.
Enabling/disabling traffic announcement priority and displaying radio text.
How to select audio or video sources for playback.
Overview of the audio display and available playback controls.
Details on the video display, pausing, skipping, and seeking within video files.
Instructions on switching between standard and full-screen video display.
How to use the media browser to select titles by artist, album, genre, or playlist.
Steps to open the map view and begin using the navigation system.
How to open the Destinations menu from the Home or map view.
Guides on inputting country, city, street, and house number for a destination.
Explains searching for POIs by location or near current position.
How to select a POI and start route guidance.
Guides on entering latitude and longitude for navigation.
Shows detailed information about a selected location on the map.
Options like saving favorites, calling stored numbers, and deleting locations.
How to store and manage the home address for easy navigation.
How to add multiple destinations as waypoints to a route.
Procedures for replacing or adding destinations while route guidance is active.
How to display the map view from the Home menu or Destinations menu.
Changing map scale, view mode (2D/3D), and map section focus.
How to select a location shown on the map as a destination or waypoint.
How to select points of interest directly from the map display.
Options within the Route menu including cancelling guidance, muting, and displaying route info.
How to block specific road sections to force route recalculation.
How to open the settings for navigation guidance and map display.
Configuring which categories of POIs are shown on the map.
Setting map orientation (North Up/Heading Up) and enabling/disabling 3D map view.
Automatically adjusts map scale based on route conditions for better visibility.
Enabling lane guidance for multi-lane roads and voice guidance for announcements.
How to access the menu for customizing route preferences.
Selecting route preferences like fastest time, shortest distance, or optimized.
Options to avoid motorways, toll roads, ferries, etc., during route calculation.
Shows current road, city, GPS info, longitude, and latitude.
Specifies the required file format (.csv) and data structure for custom POIs.
Steps to load custom points of interest files onto the device.
Enabling or disabling alerts for approaching points of interest.
Guides on how to delete your own points of interest from the device.
Choosing the format for displaying geographic coordinates (DD, DM, DMS).
Instructions for updating map data using an SD card.
Information on retrofitting the navigation function if not originally equipped.
Steps to access the phone menu and view its initial display.
Covers answering, rejecting, ending, muting calls, and switching to mobile.
Instructions for dialing numbers, calling contacts, and using the call list.
How to handle a second incoming call and switch between active calls.
Instructions for displaying and reading incoming text messages.
Setting whether incoming text messages are displayed on the screen.
Option to use the connected mobile phone's ringtone for incoming calls.
Explains connecting smartphones via CarPlay, MirrorLink, or Android Auto.
Safety warning about using smartphone apps while driving.
How to display the smartphone's user interface on the vehicle screen.
Settings for connection priority and keypad lock for smartphone features.
Enabling or disabling the superimposed guide lines for parking assistance.
Adjusting brightness and contrast for the rear-view camera image.
Explains system language requirements and basic voice command principles.
Overview of the main menu and available voice commands for key functions.
How to speak commands clearly and interrupt the system.
Using voice commands to open menus for Phone, Navigation, and Media.
Details the functions of each button on the steering wheel remote control.
Provides a visual glossary of symbols used for points of interest on the navigation map.
To Next Page