2-66
5
. HILL HOLD SET
(V-STROM 1050XT)
This sets the hill hold function. When
hill hold is set ON, the function assists
with pulling away again after stopping
on an uphill slope.
For details about hill hold, see “HILL
HOLD (V-STROM 1050XT)” on page 2-
84.
1. From the “MENU” indication, select
“HILL HOLD SET” and press the
select switch (Down) for about 2 sec-
onds. “HILL HOLD SET” starts blink-
ing and the display moves to the
setting screen.
To Next Page
Loading...
