2-124
Spring Pre-load Adjustment
To adjust the spring pre-load, turn the
adjuster 1 clockwise or counterclock-
wise.
• Turning the adjuster clockwise will
increase the spring pre-load.
• Turning the adjuster counterclock-
wise will decrease the spring pre-
load.
NOTE: Adjust both the right and left
adjusters to the same position.
There are 5 grooved lines on the side of
the adjuster for reference. Position 5
provides the minimum spring pre-load
and position 0 provides the maximum
pre-load. This motorcycle is delivered
from the factory with its adjuster set on
position 4.
A
Position 0
BPosition 4
CPosition 5
To Next Page
Loading...
