Need help?Do you have a question about the SV3C Cloud Series and is the answer not in the manual?
Connects camera to 2.4GHz Wi-Fi network, avoiding special characters in password.
Ensures camera has power, uses power button, and checks status light for pairing.
Selects 2.4GHz Wi-Fi network and enters the correct password for device connection.
Displays QR code to the camera for pairing at a specific distance.
Mounts the bracket, drills holes, inserts anchors, and attaches the camera.
Select location for maximum sunlight, avoid blocking, advise angular installation and optimal positioning.
Enables/disables motion detection, sets sensitivity level (1-10), and recording time.
Configures alarm working mode (recording duration, interval) and alert plan time period.
Explains night vision lights and provides troubleshooting for Wi-Fi connectivity and router distance.
General| Two-Way Audio | Yes |
|---|---|
| Power Supply | DC 5V/1A |
| Connectivity | Wi-Fi |
| Motion Detection | Yes |
| Storage | MicroSD card (up to 128GB), Cloud |
| Pan & Tilt | Yes |
| Lens | 3.6mm |
| Weather Resistance | IP66 |
| Night Vision | IR LEDs, up to 65ft/20m (depending on the specific model) |
To Next Page
