EasyManua.ls Logo

Svan SVCT900 - User Manual

Svan SVCT900
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2 3 4
5 6 7 8
9 10 11
COOKER HOOD
INSTRUCTION MANUAL
Read this manual carefully before operation
Pictures in this manual are for reference only, the product in kind prevail.
SVCT600
SVCT900

Questions and Answers

  • K
    Kyle DiazAug 9, 2025
    Why Svan SVCT900 has insufficient suction?
    • K
      Kaitlyn SmithAug 9, 2025
      Insufficient suction in your Svan Ventilation Hood can occur if the distance between the hood and the cooker top is too large, so you should readjust the distance. Also, too much ventilation from open doors or windows can be a cause. Consider choosing a new place to install the appliance or close some doors/windows.
  • R
    Ryan FlynnAug 14, 2025
    What to do if Svan SVCT900 Ventilation Hood is vibrating?
    • J
      Joshua CoxAug 14, 2025
      If your Svan Ventilation Hood is vibrating, it could be due to several reasons. First, a damaged blade can cause vibration, so replace the blade. Second, the motor might not be tightly fastened, so ensure you fasten the motor tightly. Finally, the cooker hood itself might not be tightly fixed, so make sure to fix the cooker hood tightly.
  • L
    Laurie SmithAug 25, 2025
    What to do if both light and motor do not work on Svan SVCT900?
    • S
      Sandra NavarroAug 25, 2025
      If both the light and motor aren't functioning on your Svan Ventilation Hood, it could be due to a damaged light, so replace the lights. Another possibility is a loose power cord; in this case, connect the wires as shown in the electrical diagram.
  • R
    rknightAug 28, 2025
    Why Svan SVCT900 machine inclines?
    • H
      hmichaelAug 29, 2025
      If your Svan Ventilation Hood is inclining, it's likely because the fixing screws or the hanging screws are not tight enough. Tighten the fixing screws and the hanging screws to make it horizontal.
  • M
    Martha RoachSep 3, 2025
    How to fix oil leakage in Svan SVCT900?
    • M
      Michelle EricksonSep 3, 2025
      Oil leakage in your Svan Ventilation Hood may be happening because the outlet and the air ventilation entrance are not tightly sealed. To fix this, take down the outlet and seal it with glue.
  • S
    Stephanie BaileySep 10, 2025
    What to do if light is on but the motor does not work in Svan SVCT900 Ventilation Hood?
    • D
      David TaylorSep 12, 2025
      If the light is on but the motor isn't working in your Svan Ventilation Hood, here are a few possible causes and solutions: * The blades might be blocked. Check the blades. * The capacitor could be damaged. Replace the capacitor. * The motor itself might be damaged. Replace the motor. * The internal wiring of the motor could be cut off or disconnected, possibly producing an unpleasant smell. Replace the motor.

Svan SVCT900 Specifications

General IconGeneral
MaterialStainless steel
Number of motors1
Number of speeds3
LightingLED
Width90 cm
Filter typeAluminum

Related product manuals