Why Svan SCPT600A1IX Ventilation Hood has insufficient suction?
Insufficient suction in your Svan Ventilation Hood can occur if the distance between the hood and the cooker top is too large, so you should readjust the distance. Also, too much ventilation from open doors or windows can be a cause. Consider choosing a new place to install the appliance or close some doors/windows.
What to do if Svan SCPT600A1IX Ventilation Hood is vibrating?
If your Svan Ventilation Hood is vibrating, it could be due to several reasons. First, a damaged blade can cause vibration, so replace the blade. Second, the motor might not be tightly fastened, so ensure you fasten the motor tightly. Finally, the cooker hood itself might not be tightly fixed, so make sure to fix the cooker hood tightly.
What to do if light is on but the motor does not work in Svan Ventilation Hood?
If the light is on but the motor isn't working in your Svan Ventilation Hood, here are a few possible causes and solutions: * The blades might be blocked. Check the blades. * The capacitor could be damaged. Replace the capacitor. * The motor itself might be damaged. Replace the motor. * The internal wiring of the motor could be cut off or disconnected, possibly producing an unpleasant smell. Replace the motor.
What to do if both light and motor do not work on Svan SCPT600A1IX?
If both the light and motor aren't functioning on your Svan Ventilation Hood, it could be due to a damaged light, so replace the lights. Another possibility is a loose power cord; in this case, connect the wires as shown in the electrical diagram.
Why Svan Ventilation Hood machine inclines?
If your Svan Ventilation Hood is inclining, it's likely because the fixing screws or the hanging screws are not tight enough. Tighten the fixing screws and the hanging screws to make it horizontal.
How to fix oil leakage in Svan SCPT600A1IX?
Oil leakage in your Svan Ventilation Hood may be happening because the outlet and the air ventilation entrance are not tightly sealed. To fix this, take down the outlet and seal it with glue.
General| Brand | Svan |
|---|---|
| Model | SCPT600A1IX |
| Category | Ventilation Hood |
| Language | English |
To Next Page