TESTING YOUR FAN
WARNING: Make sure wiring connection is correct before turning ON the main switch.
Fan with remote control
To use fan, press desire fan speed on remote control set and it should operate on Low, Med
and Hi speed. If you cannot operate this function, refer to the troubleshooting procedure
below.
Press OFF button to turn off the fan and always remember to switch off the main switch to
save energy. To use light (for model with light only), press light control button ON and light
should light up. If you cannot operate this function, refer to the troubleshooting procedure
below.
TROUBLE SHOOTING GUIDE
Minor problems often can be fixed without an electrician. Before doing any work, shut off
power supply to avoid electrical shock.
Power is off or fuse is blown
Turn power on or check fuse
Turn power off. Loose
canopy, check all
connections
Inconsistent location for dip
switch
Set the dip switch to be the
same of transmitter and
receiver
Cannot control speed or light
Turn power off and check
the receiver wiring is correct
Check the bulb is not burnt
DISPOSAL OF PACKAGING AND PRODUCT
Dispose of packaging in an environmentally-friendly manner.
This appliance is labelled in accordance with European Directive 2012/19/EU
concerning used electrical and electronic appliances (waste electrical and
electronic equipment - WEEE). The guideline determines the frame work for
the return and recycling of used appliances as applicable throughout to the EU.
PACKAGE INFORMATION: Packaging materials of the product are manufactured from
recyclable materials in accordance with our National Environment Regulations. Do not dispose
of the packaging materials together with the domestic or other wastes. Take them to the
packaging material collection points designated by the local authorities.
SVAN TRADING S.L.
C/Ciudad de Cartagena, 20. Paterna (46988). SPAIN.
info@svanelectro.com
96060034
To Previous Page
Loading...
