How to fix SVAT VU5 Security Camera when there is no picture or signal?
If your SVAT Security Camera shows no picture or signal, ensure your TV/monitor is on the correct video input channel (INPUT, AV CHANNEL, LINE 1, LINE 2, or AUX). If connected to a VCR/DVR, verify the connection to your TV/monitor. Check all connections to ensure they are secure and that the camera is powered up.
What to do if SVAT Security Camera picture is too dark?
If your SVAT Security Camera picture is too dark, and you are using it at night, ensure the subject is within 15ft (this may vary based on ambient light). During the day, adjust the sunshade backwards to allow more light. Also, check the brightness and contrast settings on your TV/monitor or VCR/DVR, if connected. Consider moving the camera to another location.
Why is SVAT VU5 Security Camera picture too bright?
If the picture from your SVAT Security Camera is too bright, ensure the camera is not aimed at direct sunlight. Adjust the sunshade by sliding it forwards to block excess light. Ensure nothing obstructs the CDS sensor, as this can activate night vision mode, which may produce extra light. You may also want to move the camera to a different location.
How to fix SVAT VU5 Security Camera night vision when it's not working?
If the night vision on your SVAT Security Camera is not working, test the camera in a completely dark setting, as too much light may prevent the sensor from activating. Cup your hands around the front of the camera and check if the LEDs are glowing red; if not, check the power supply.
General| Brand | SVAT |
|---|---|
| Model | VU5 |
| Category | Security Camera |
| Language | English |
To Next Page
