ENG
User Manual
PS-48
5
Connecting an additional speaker
For model «SVEN PS-48», you can connect an additional speaker:
• Turn on both speakers (long press button c). Select Bluetooth mode. On both speakers, the
indicator will flash blue light flashes.
• On one of the speakers, press and hold the button b. The speakers will connect with each other.
Note. At the subsequent inclusion of both speakers, they will be connected automatically.
TECHNICAL SPECIFICATIONS
Parameter, measurement unit Value
Frequency response, Hz 120 – 20 000
Output power (RMS), W 5
Membrane, mm Ø 40
Radius of operation Bluetooth, m до 10
Battery capacity, mA*h 500
Power supply USB/
5V
Weight, g 220
Dimensions, mm 85 × 85 × 60
Notes:
• Technical specifications given in this table are supplemental information and cannot give
occasion to claims.
• Technical specifications and package contents are subject to change without notice due to
the improvement of SVEN production.
Technical support is on www.sven.fi.
Fig. 2. Connection diagram
USB to micro USB
power cable
USB jack
Mini-jack to mini-jack
signal cable
Mobile device
PC
Socket
To Next Page
Loading...
