ENG
6
Portable Speaker System with
Bluetooth and FM-radio
Radio mode
• To improve the reception quality of the radio signal, connect the 3.5 mm mini-jack cable
(included) to the AUX input b or USB cable to USB type C (included) to DC 5V g input.
• Turn on the speaker system – press button МODE j several times until the display shows the
station frequency. Long-term pressing button o activates auto search mode. After scanning
completion, the first scanned radio station will start to operate automatically. With buttons p
and n select a desired radio station.
Player mode
Attention! The file system of a micro SD carrier is FAT32. Maximum volume is 32 GB. It is not
recommended to use the micro SD Ultra Speed.
• The system will enter the Player mode automatically when a carrier (USB flash or SD card) is
connected to corresponding ports. Use button o to switch between Play / Pause modes. You
can control tracks by using buttons p (previous track) and n (next track).
The use in the wired mode
• Speaker system can be used as an external device for amplifying any audio source with a 3.5 mm
output mini-jack. Connect a cable mini USB, plug 3.5 mini-jack to the audio input AUX b. Turn
the speakers to the LINE mode – press the MODE button j several times until «LINE» appears
on the display.
Reset
• To reset the timbres and memorized radio stations: long press EQ m on display will appear
«----».
Fig. 3. Connection diagram
USB to USB type C
power cable
USB jack
Mini-jack to mini-jack
signal cable
Mobile device
PC
Socket
To Next Page
Loading...
