Need help?Do you have a question about the SVS PB16-ULTRA and is the answer not in the manual?
Details weight, dimensions, amplifier power, driver design, and frequency response.
Lists key amplifier capabilities including Sledge 1500 watt Class D design, DSP, and MOSFETs.
Highlights the functionality of the SVS Bluetooth DSP control app for iOS and Android devices.
Identifies and describes input/output connections, controls, and ports on the rear panel of the subwoofer.
Instructions for safely connecting the subwoofer to an AC power outlet for operation.
Explains connecting via a single RCA or XLR cable to the LFE input for bass management.
Details connecting to stereo receivers/preamplifiers using left/right line-level inputs for two-channel audio.
Describes the trigger input for automatic on/off control from other system components.
Provides methods for integrating two or more subwoofers for improved acoustic performance.
Guidance on setting subwoofer controls when using with an AV receiver or processor with bass management.
Advice on setting controls for stereo setups without bass management, using subwoofer DSP.
Discusses the impact of corner placement on bass response, potential for nulls, and boominess.
Explains benefits of front-of-room placement for blending with main speakers and minimizing localization.
Covers side wall placement as an effective option for achieving good accuracy and output.
Offers recommended placement strategies and considerations for using two subwoofers in a system.
Details features, installation, and advanced control via the SVS mobile app.
Explains how to use the included IR remote for adjusting subwoofer settings with feedback.
Describes the front panel interface and its intuitive controls for managing settings.
Guidance on setting subwoofer volume to achieve balanced, accurate, and non-intrusive bass.
Information on using the LPF for smooth sonic transition and flat frequency response with main speakers.
Explains aligning subwoofer output timing with main speakers to resolve cancellation issues.
Discusses reversing polarity to fix bass nulls or boomy spots at the crossover frequency.
Details using Parametric EQ to remove peaks/dips and customize output based on listening preferences.
How to optimize low frequency output and extension when sound wave density is high in small rooms.
Allows saving and switching between custom settings for movie, music, and other content types.
Explains how port plugging affects tuning for maximum output, extension, or transient response.
Configuration options for standby mode, display settings, and resetting the subwoofer to factory defaults.
Critical safety warning about the coin cell battery in the remote control and potential hazards if swallowed.
Details compliance with FCC rules, including interference and RF exposure limits for digital devices.
Outlines compliance with Industry Canada's standards for RF devices and potential interference.
General| Driver Size | 16 inches |
|---|---|
| Room Gain Compensation | Yes |
| Amplifier Power | 1500 watts RMS (5000+ watts peak) |
| Subwoofer Type | Powered |
| Cabinet Design | Bass-reflex |
| Port Tuning Frequency | 16 Hz |
| Inputs | Stereo RCA, XLR |
| Outputs | Stereo RCA, XLR |
| Phase Control | 0 to 180 degrees |
| Low Pass Filter | 30 Hz - 200 Hz |
| Finish | Black Ash, Piano Gloss Black |
| Dimensions | 25" H x 21.7" W x 30.9" D |
| Enclosure Type | Ported |
To Next Page
