9
ENGLISHSWAGTRON EB-7 16" Electric Bike
Section 3. How to Use the Battery
3.1 Charging Instructions
Charge the eBike before using it.
Step 1. Make sure the bike is turned off and connect the charger’s cables and adapter if needed.
Step 2. Plug the charger into a wall outlet (100V-240V) then plug the other end into the charging port. Remove the cap as needed.
Step 3. Allow 3~4 hours’ time for charging. The charging adapter’s light will turn red during charging and then turn green once
charging is complete. Disconnect all cables once charging is nished.
Charging Port
Charging Cable
To Next Page
Loading...
