Need help?Do you have a question about the Swann PRO-750 and is the answer not in the manual?
General| Night Vision | Up to 82ft/25m |
|---|---|
| Power Supply | 12V DC |
| Indoor/Outdoor | Outdoor |
| Body Material | Aluminum |
| Connectivity | BNC |
| Motion Detection | Yes |
| Weather Resistance | IP66 |
| Operating Temperature | -4°F ~ 122°F / -20°C ~ 50°C |
| Storage | DVR |
Important safety instructions and recommendations for optimal performance and handling.
Summary of default PTZ configuration including command address, protocol, and RS485 polarity.
Provides a numbered list of steps for connecting the camera and controller to the system.
Details running and connecting the camera cable, including waterproofing considerations.
Explains how to assign a unique 'Command Address' to each camera for individual control.
Details setting the correct Protocol (Pelco-D) and Baud Rate for proper camera operation.
Guide to connecting multiple PTZ systems to a single controller via RS485 in a bus configuration.
How to set, access, and use preset positions for quick camera view recall.
How to use numerical codes via the remote for advanced functions like setting limits.
To Next Page
