5
HOW TO USE
SMART MODE (closed grill)
1. Make sure you have removed all the packaging and cleaned the product.
2. Connect to the mains supply
3. Press the POWER button and the LED display will illuminate
4. Turn the dial knob to cycle through the various presets. The selected preset will
illuminate accordingly.
5. Once you have decided which preset you need, press the OK button to start the
pre-heating process. The light will flash during the pre-heating process.
6. When the cooking plate reaches the preheat setting temperature, the appliance
will BEEP to let you know that the preheat step has finished. The grill is now ready
to put food on it.
7. Open the grill and put the food on it. Close the grill. The control system will work
out the thickness of the food in about 5 seconds.
8. During cooking, each status bar light will flash accordingly to let you know the
status of the cooking. From PRE-HEATING through to WELL DONE.
9. When cooking beef only, it will BEEP for RARE, MEDIUM and WELL DONE. For
other modes, it will BEEP on WELL DONE ONLY
10. When the food is cooked according to your taste, open the grill. this will stop the
cooking process automatically.
GRIDDLE MODE (manual)
1. Open the appliance and press the 180° release button so you can fully open the
grill as a griddle.
2. Note: You can only use the M programme (manual mode) when cooking like this).
3. Press power switch button to start working.
4. Select M mode and press OK button to confirm.
5. The grill will start to preheat and it will stop heating once the cooking plate
reaches setting temperature.
6. You can then add food to the plate.
7. NOTE: Smart mode is not available when using as a griddle
SP22140_IM.indd 5 18/09/2020 08:45
To Next Page
Loading...