To Next PageTo Next Page
Need help?Do you have a question about the Swann SWIFI-SPOTCAM and is the answer not in the manual?
General| Type | - |
|---|---|
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| Ethernet LAN | Yes |
| Form factor | Bullet |
| Mounting type | Ceiling/wall |
| Product color | Black, White |
| Minimum illumination | - lx |
| Power source type | AC |
| Operating temperature (T-T) | -20 - 45 °C |
| Number of cameras | 1 |
| Total megapixels | - MP |
| Maximum resolution | 1920 x 1080 pixels |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Depth | 88 mm |
|---|---|
| Width | 66 mm |
| Height | 145 mm |
Identifies key parts of the camera like LEDs, microphone, speaker, and sensors.
Obtain the Swann Security app from the Apple App Store or Google Play Store.
Open the app, create and activate your Swann Security account via email.
Connect the camera to your Wi-Fi network via the Swann Security app.
Securely mount the camera to surfaces using provided screws and wall plugs.
Loosen locking ring to pan/tilt, then tighten to secure the camera's position.
Optimize motion detection by adjusting camera angle for target movement.
Understand device status via LED light colors and patterns.
Essential safety precautions for installation, power, and handling.
FCC, IC, and CE compliance details including RF exposure and disposal guidelines.
