GB.TBIQ3.130915
Swegon reserves the right to alter specifications.
www.swegon.com 1
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
P1
COM POWER
IQlogic
+
1234 5678 9101112
-+-+ -
++--S - S
C
13
NO
14
C
15
NO
16
+
17
-
18
+
19
-
20
G
21
G0
22
Com 1Heat/Cool Com 2
Installation, IQlogic
+
, modules TBIQ-3-1-aa and TBIQ-3-2-aa
GOLD
1. General
The IQlogic
+
is used for extra functions for which the
inputs and outputs are not included as standard in the air
handling unit’s control unit.
2. Installation
Install the IQlogic
+
at an appropriate place, for example at
an unoccupied spot on a DIN rail inside the air handling
unit’s electrical equipment cubicle .
Connect the communication cable, supplied with the unit,
to one of the connections on the module. It is not impor-
tant which connection is used. The reason why there are
two connections is to make it possible to connect several
IQlogic
+
.
Connect the other end of the communication cable to one
of the connections of the control unit, marked COM (the
exact connection is specified under the relevant function).
Function selector switch
0 ReCO
2
, TBIQ-3-1
1 Coil heat exchangers, TBIQ-3-1
2 Plate heat exchanger
, TBIQ-3-1
3 External supervision, TBIQ-3-2
4 HumidificationPlate heat exchanger, TBIQ-3-1
5 AQUA Link (see separate instructions), TBIQ-3-1
6 External supervision, TBIQ-3-2
7 All Year Comfort (see separate instructions), TBIQ-3-2
8 Booster unit, TBIQ-3-2
9 Preheating, TBIQ-3-2
A Xzone heating (see separate instr. TBLZ-1-50), TBIQ-3-2
B Xzone cooling (see separate instr. TBLZ-1-50)
, TBIQ-3-2
C Spare
D Spare
E Extra control sequence and Season Heating
, TBIQ-3-2
F Spare
Function
selector
switch
3. Data
Connection port 2 x RJ 12 6/6
Supply voltage
(Via modular contact) 24V DC
Relay contacts 2 A/AC3
5 A/AC1
Ambient temp.
normal -40 °C - +55 °C, 10 - 95 % RH
Enclosure class IP 20 to EN 60529
CE-approved to EN 61000-6-2, EN 61000-6-3
A TBIQ-3-2 is shown.
To Next Page
Need help?
General
