Do you have a question about the SWELLPRO Fisherman FD3 and is the answer not in the manual?
Visual representation of the drone's components and their labels.
Explains the meaning of various LED indicator lights on the aircraft.
Instructions for correctly installing the drone's propellers onto the motors.
Guidance on orienting the antenna for optimal signal connection during flight.
Steps for safely installing and removing the flight battery from the drone.
Procedure for powering the aircraft on and off.
Information regarding the aircraft's main power source.
How to check the battery's charge level using LED indicators.
Detailed steps for charging the flight battery using the provided charger.
Method to check battery status and cell voltage.
Procedure for repairing the battery if indicated by the charger.
Guidelines for storing batteries to maintain health and prevent over-discharge.
Details on the waterproof barometric membrane and its importance.
Labeled illustration of the remote controller's buttons and components.
Overview of the advanced version display screen and its indicators.
Overview of the basic version display screen and its indicators.
Explains the status lights on the remote controller.
Adjusting display brightness, contrast, saturation, and language.
Instructions for installing and using the phone mount.
Configuring video transmission channels and bands.
Procedure for powering the remote controller on and off.
How to charge the remote controller.
Steps to pair the remote controller with the aircraft.
Guide to calibrating the remote controller's control sticks.
Best practices for antenna orientation and understanding blind spots.
Procedure to reset the remote controller's Wi-Fi password.
Essential safety precautions and environmental considerations for flying.
Information on altitude limits and airspace regulations.
Items to check before each flight for safety and readiness.
Step-by-step guide for taking off, hovering, and landing.
Explanation of how control sticks manage aircraft movement.
Procedures for arming (starting) and disarming (stopping) the motors.
Detailed instructions for aircraft takeoff and landing.
Descriptions of GPS, ATTI, and Cruise flight modes.
Details on low battery alerts and automatic responses.
Information on the aircraft's automatic return to home function.
How to set the altitude for the Return to Home function.
Automatic RTH activation due to signal loss.
RTH triggered by low flight battery voltage.
Automatic payload release triggered by low battery.
Procedures for water and boat takeoff/landing.
Using PowerFlip to right the aircraft after flipping over in water.
Operating photo and video functions via the remote controller.
Adjusting the camera's tilt angle up and down.
Accessing and adjusting camera settings like photo/video parameters.
Viewing saved photos/videos and adjusting WB, EV, ISO, language.
Understanding the LED indicators for camera status.
Steps for inserting and securing the microSD card.
Instructions for activating payload release.
Where to download the FDFly mobile application.
Steps to connect the phone via Wi-Fi to the aircraft.
Introduction to the app's home and main flight interfaces.
Detailed specifications for the aircraft and remote controller.
Information on warranty policy and customer support.
General guidelines for battery care, usage, and maintenance.
Advice for operating batteries in cold environments.
Best practices for charging the aircraft batteries.
Procedures for storing and transporting batteries safely.
Instructions for safely disposing of used batteries.
Procedures for cleaning and maintaining the aircraft and modules.
Important safety warnings and user responsibilities.
Details on the manual version and where to find updates.
| Manufacturer | SWELLPRO |
|---|---|
| Category | Drones |
| Model | Fisherman FD3 |
| Camera Resolution | 4K |
| Waterproof | Yes |
| Waterproof Rating | IP67 |
| GPS | Yes |
| Return to Home | Yes |
| Follow Me Mode | Yes |
| Waypoint Navigation | Yes |
| Flight Time | 25 minutes |
| Wind Resistance | Level 5 |
| Operating Temperature | -10°C to 40°C |
| Charging Time | 120 minutes |