Do you have a question about the SWELLPRO SplashDrone 4 and is the answer not in the manual?
Max Payload Capacity | 1.5 kg |
---|---|
Camera Resolution | 4K |
Waterproof Rating | IP67 |
Wheelbase Size | 450mm |
Max Ascent Speed | 5 m/s |
Max Descent Speed | 3 m/s |
Max Flight Speed | 16 m/s |
Max Tilt Angle | 35° |
Max Flight Distance | 5 km |
Positioning | GPS/GLONASS |
Hovering Accuracy | ±0.5 m |
Operating Temperature | -10°C to 40°C |
Gimbal | 3-axis |
Return to Home | Yes |
Obstacle Avoidance | No |
Transmitter Range | 5 km |
Max Flight Time | 30 minutes |
Control Method | Remote Controller |
Frequency | 2.4 GHz |
Battery | LiPo |
Charging Time | 120 minutes |
Battery Capacity | 5000 mAh |
Visual identification of drone components.
Visual identification of remote controller components.
Explanation of the remote controller display interface and icons.
Instructions for correctly installing propellers on the drone motors.
Steps to install the intelligent flight battery into the drone.
Guide for attaching cameras and other accessories to the drone.
Explanation of LED indicators for drone status.
Details on the intelligent battery, its management system, and level indicators.
Explanation of drone battery level warnings and required actions.
Guidance on antenna positioning for optimal signal transmission.
Details on the strobe light and waterproof barometric membrane.
General guidance on using the remote controller and its primary functions.
Instructions for powering the controller and selecting flight modes.
Explanation of left and right joystick functions for drone movement.
How to operate the camera and gimbal using controller functions.
Operation of Follow Me mode and Return to Home (RTH) function.
Using Smooth+ for fine-tuning Roll and Yaw control.
How to enter and exit BOAT mode for water operations.
Switching between Gimbal Follow and Lock modes.
Using left and right payload buttons for release and slow mode.
Optimal signal transmission and patch antenna use.
How to attach mobile devices to the remote controller mount.
Instructions for charging the remote controller.
Initial pairing process between the remote controller and aircraft.
Locating the Serial Number (SN) for pairing identification.
Pairing procedure for SN numbers ending with V01.
Pairing procedure for SN numbers ending V02 or later.
Details of SDK, Charging, Pairing, and Micro USB ports.
Guidelines for safe flying environments and pilot responsibilities.
Regulations and default altitude limitations for drone operation.
Essential checks before each flight for safety and readiness.
When and how to perform compass calibration for accuracy.
Process for calibrating the gyroscope for flight stability.
Steps for calibrating the Inertial Management Unit (IMU) sensor.
Step-by-step guide for basic drone take-off, flight, and landing.
Procedures for arming and disarming the drone motors.
Guidelines for taking off and landing on water or boats.
Using Power Flip and understanding different flight modes.
Characteristics and use of GPS, ATTI, Sport, Orbit, and Cruise flight modes.
Explanation of Headless, Manual, and Boat flight modes.
Operation of the Follow Me mode for tracking the remote controller.
How the RTH function works and its parameters.
Auto RTH and auto payload release on low battery.
Steps to download and connect the SDFly mobile application.
Configuring mobile data while using the SDFly app.
Overview of the SDFly app's home screen and main interface.
Using the map interface for navigation and mission planning.
How to set or reset the Wi-Fi password for the controller.
Technical details of the SplashDrone 4 aircraft.
Technical details of the remote controller and intelligent battery.
Importance of updating aircraft and controller firmware.
General guidelines and regulations for flying the drone safely.
Procedure for calibrating the remote controller joysticks.
Guidelines for proper battery care, charging, storage, and disposal.
Specific advice for using the battery in cold environments.
Guidelines for storing and transporting batteries safely.
Proper procedures for disposing of used batteries.
Steps for cleaning and maintaining the drone and its modules.
Important safety warnings, legal responsibilities, and disclaimers.