©2022 SwellPro All Rights Reserved 34
If the pairing process does not succeed, please try to pair it again from step 1.
Remote Controller Rear Ports
① SDK Serial Port: access to flight control
data and transparent transmission.
② Charging Port: remote controller charging
port.
③ Pairing Button: used for aircraft and
remote controller pairing.
④ Micro USB: use for remote controller
firmware upgrade.
⑤ Ethernet Port: This supports the
development of computer ground station
software to control the aircraft and its
airborne equipment.
Ensure to tightly seal the rear rubber sealing before use to prevent water getting in
to the remote controller.
To Next Page
Loading...
