www.swetrack.com
3
Installing the device
The SweTrack Lite is designed to connect directly to the electrical system of your vehicle.
SweTrack Lite works with power systems between 9 and 36 volts. lf you are unsure how
to install the product, contact a specialist. Swe Track accepts no liability for damage to
product or property resulting from improper installation.
In the product’s box you will nd a set of wires that are used to connect the SweTrack Lite device to
the vehicle’s electrical system. Connect the wires to the device using the round plug located on the
wiring and the device.
Connect the black cable to a negative terminal, and the red cable to a positive terminal. The orange
cable can be connected to the ignition switch of the vehicle, which allows you to receive notication
when the ignition of the vehicle is turned on or off. However, using this cable is optional and is not
required for the product to work.
When you have installed the device in your vehicle, the device is ready to start communicating with
you. However, you need to download the app and activate a data plan a before you can begin using
the product
1
2
3
Connect the device to the wiring
Connect the device to the vehicle’s power system
The device is now ready for use
To Next Page
Loading...