SweTrack Lite - Power saving mode; Edit your power saving mode

To Next Page

To Previous Page

www.swetrack.com

Power saving mode

By default, the product is registered to only search and report position data to the app when it is in motion.

However, other functions, such as mobile antennas, are turned on. This setting is called standard power

saving mode. With this mode, you can change settings at any time as the product is always connected to the

network, but it only searches for new positions as it moves.

You can also activate an aggressive power saving mode, which means that all functions are switched off

when the product is stationary. This saves a lot of power, but it also means that any settings you change do

not take effect until the product wakes up. It is also possible to deactivate all energy saving functions. This

means that the product also reports position data when it is stationary. This suits you who need continuous

updating about the product’s position even when the object is stationary, but this consumes more battery.

Start by rst navigating to My Devices that you reach by tapping the icon on the far left in the lower

navigation menu.

Here you get a list of all the devices that you have added to your account. Select device by tapping the

arrow icon to the right of the device name. This will open the device settings.

By pressing Power Saving Mode, you open a pop-up with different options for Power Saving modes.

The switch that is activated will be marked blue.

Select an option by tapping the corresponding switch and then save by clicking on Save.

Edit your power saving mode