EQUIPMENT DETAILS
107
Blind and Flyscreen
The blind and flyscreen operate Independently
of each other and are engaged by connecting
to each other and sliding.
Safety precautions:
1. Repairs should be carried out only by
trained personnel.
2. Inform an approved dealer in case of
defects and malfunctions.
3. Before starting off, check the rooflight for
damage in the acrylic dome (tension cracks)
and the winding mechanism which could
arise owing to, for example, branches and
other natural causes.
4. Do not step in the acrylic dome.
5. Close the roof light before starting off (check
whether it is locked).
6. Do not leave the vehicle with the rooflight
open (danger of burglary or from rain).
7. Do not open in strong wind or rain.
8. Before opening, remove snow, ice, dirt, etc.
from the acrylic dome.
9. Malfunctions are to be repaired by an
approved dealer at once.
10. Do not use caustic detergents (danger of
tension cracks in the acrylic dome).
11. Do not operate whilst the vehicle is
moving.
Care instructions:
• Please clean the acrylic panes with the
Seitz Acrylic Cleaner.
• Stains and light scratches on the acrylic
pane can be removed by using the Seitz
Acrylic Polish and the Seitz special
polishing cloth.
• Use talcum powder (4 times yearly) to care
for the rubber seals
• Clean the blinds only with water and mild
soap suds
• The guarantee becomes null and void if these
instructions are not followed.
Seat swivel (Driver/Passenger)
For those cabs with swivel seats
To turn the swivel, slide the BLACK lever
rearwards and adjust to the required
angle. Before driving off ensure the locking
mechanism is fully secure.
ROOFLIGHTS / SEAT SWIVEL
To Next Page
Loading...
