74
SWIFT COMMAND POWER CONTROL SYSTEM
Warning When Type
Mains lead
(hook-up
cable) still
connected /
plugged in
When the engine is started
and the mains cable is still
plugged in and the charger is
switched on
Message on screen and repeated beeps
from the control panel. The beeping will not
stop until the hook-up lead is removed.
Heating
system
When set to control the
heating system, the EC800
control panel will show related
heating system warnings,
which will include the error
number and error description
Message on screen and 60 second audible
beep. Additional descriptive information is
available when using the Swift Command
App.
Refrigerator /
Fridge Freezer
When set to control the
refrigerator, the EC800
control panel will show related
warnings which will include
the error number and error
description
Message on screen and 60 second audible
beep. Additional descriptive information is
available when using the Swift Command
App.
To Next Page
Loading...
