Swift EB137CD User Manual

11
Adjusting the cutting height
The cutting heigt can b
e varied in 5 steps
from 25 mm (1) to 75 mm (5) with the cutting
height adjustment.

Pull the handle outwards slightly.

Set the required cutting height.

Release the lever again.
Inserting/replacing the battery
 Charging the battery as described in the
user manual of the charger.
 Open the battery cover (1.)
 Press the charged battery into the power
tool until it clicks into place (2.).
 Close the battery cover (3.)

To remove, press the release button (
1.
)
and pull out the battery (
2.
).
CAUTION!
Protect the battery
contacts when the
battery is not being used. Loose metal parts
may short-circuit the contacts –
Explosion and fire hazard!
EB137CD

Swift EB137CD Specifications

General

Brand	Swift
Model	EB137CD
Category	Lawn Mower
Language	English