Swift EB137CD User Manual

12
Switching on/off the power tool
Switching on

Press the switch interlock and hold
down (1).

Pull back the the On/Off lever towards
the handlebar (2). The motor runs.
Switching off

Release the On/Off lever. The motor
stops.
WARNING!
After release the On/O
ff lever, t
he cutter bar
continues running briefly. Risk of injury!
Battery state of charge

Press the button to check the state of
charge at the state of charge indicator
LEDs.
The indicator goes
out after 3 seconds.
If the LED lights red, the battery must be
recharged. If none of the LEDs light up
after the button is p
ressed, the battery is
faulty and must be replaced.
Removing and emptying the
grass catcher
If clippings are left lying on the ground or if
the level indicator on
the grass catcher is
closed (with the motor running) , the grass
catcher bag is full and should be emptied
immediately.
!

Switch the motor off.

Wait until the cu
tter bar stops.

Lift the discharge flap.

Remove the grass catcher.

Lower the discharge flap down again.

Empty the grass catcher.

Before hooking, remove any obstructions
from the cutting area.
EB137CD

Swift EB137CD Specifications

General

Brand	Swift
Model	EB137CD
Category	Lawn Mower
Language	English