The Swift Green Filters SGF RV Filter Manual describes an under-sink water filtration system designed for recreational vehicles (RVs). This manual provides comprehensive instructions for the installation, operation, and maintenance of the SGF RV filter system, emphasizing safety and optimal performance.
Function Description:
The Swift Green Filters SGF RV Filter System is a twin-candle water filtration unit intended to provide filtered water in RVs. It connects to the RV's water supply, typically a garden hose from a campground water source, and delivers filtered water to the RV's internal plumbing. The system is designed to improve water quality by filtering out impurities, ensuring safer and cleaner water for various uses within the RV. The "twin candle" design suggests a two-stage filtration process, likely involving different filter media to address a broader range of contaminants.
Important Technical Specifications:
- Operating Temperature: The system is designed to operate with cold water only. The maximum operating temperature for water in this filter system is 100°F (38°C), while the minimum operating temperature is 40°F (4.4°C). This specification highlights the importance of preventing the filter from freezing, which could damage the unit.
- Connection Type: The system utilizes 3/4 X 3/8 swivel pipe fittings and 3/4 X 3/8 garden hose fittings for connecting to the water source and the RV panel. This indicates compatibility with standard garden hoses and RV water inlets.
- Components: The system includes a receiver box, receiver bracket, filter receivers, garden hose fittings, swivel FGH x male pipe connectors, pan cross head screws, NPT x NPT connectors, and filter cartridge assemblies. The inclusion of multiple components suggests a complete kit for installation.
- Filter Cartridge: The system uses "Filter Cartridge Assembly" units, with two included, consistent with the "twin candle" description.
- Clearance for Maintenance: A minimum clearance of 2.5 to 3 inches is required for easy removal or replacement of the filter cartridge, indicating the physical dimensions and space requirements for installation and servicing.
Usage Features:
- Under-Sink Installation: The system is designed for under-sink installation, which is a common setup for water filtration systems in RVs, conserving counter space.
- Cold Water Use Only: A critical usage feature is that the system must only be installed on cold water lines. Using hot water could damage the filter or affect its performance.
- Prevention of Freezing: Users are explicitly warned to prevent the filter from freezing, which is a common concern in RVs, especially during colder seasons or storage.
- Water Hammer Prevention: The manual advises contacting an expert to prevent water hammer conditions, as these can affect the filter's operation. This suggests that sudden pressure changes could potentially damage the system.
- Secure Connections: Emphasis is placed on ensuring all tubing and fittings are secure and do not leak, highlighting the user's responsibility for proper installation to prevent water damage.
- Location Selection: Users are instructed to choose a mounting location where drill tools will not come into contact with other water pipes and where other items (buckets, waste bins) will not collide with the filter system, ensuring both safety during installation and proper functioning during use.
Maintenance Features:
- Filter Cartridge Replacement: The filter cartridge should be replaced every six months to ensure optimum filter performance. This is a standard maintenance interval for many water filters, indicating the lifespan of the filter media.
- Easy Cartridge Removal: The manual describes a simple process for cartridge replacement: holding the filter, turning it to the left until loose, and gently pulling it out. This suggests a quick-connect or twist-lock mechanism for user-friendly maintenance.
- New Filter Installation: Installing a new filter involves inserting it into the receiver and turning it to the right until it stops, indicating a straightforward installation process.
- Flushing After Replacement: After installing a new filter, users are instructed to run 10-15 gallons of water through the system to flush it before use. This is a common practice to remove any loose carbon fines or air from the new cartridge.
- Leakage Responsibility: The manual explicitly states that "Water leakage is installation responsibility. Manufacturer is not responsible," underscoring the importance of careful installation and regular checks by the user.
- Customer Support: Swift Green Filters provides customer service via a toll-free number (1-888-223-6762) and a website (www.swiftgreenfilters.com) for support and replacement parts, ensuring that users have resources for assistance.
Need help?
General
To Next Page