Swim & Fun CleanRunner Poolrobot - Troubleshooting Common Issues; Included in the Package; Preparing for Winter

MV-1046-9-2016
.
Swim & Fun Scandinavia
.
info@swim-fun.dk
.
www.swim-fun.com
© All rights reserved Swim & Fun Scandinavia ApS 2016
Page 41
7. Trouble Shooting
Symptom Possible reason Corrective action
Cable twists or coils up Cable not fully released Unplug power line and release cable
Nozzle in extra angle Adjust water outlet into proper angle
Obstruction in pool Remove obstruction in pool
Stuck on main drain outlet of
the pool
Turn off pool lter system
Long time working Release manualy
Cleaner does not reach all pool
area
Power supply unit improperly
positioned
Place power supply in proper position so that
cleaner can reach all area
Nozzle in improper direction Adjust nozzle into proper direction
Customized pool shape Adjust the nozzle to lead to bigger moving
radius
Pool lter system and pump
open
Turn off pool lter system
Cable not long enough in pool Release cable
Cleaner does not work Power cord not connected
well
Plug power cord and cable line
Damaged during transporta-
tion
Contact local vendor
Cleaner does not match local
rated voltage
Contact local vendor
8. Packing List
Item Name Quantity (pc) Remarks
1 Cleaner 1 In carton
2 Power supply unit 1 In carton
3 Manual & certicate 1
4 Brush 1
9. Winter storage
During the winter season when the outside temperatures fall below 10C CleanRunner should be
removed to prevent damage from freezing water. Store it inside in a dry and frost free location.
MV-1046-CleanRunner-GB.indd 41 29/09/2016 12.22