98
Operating
1. Put SWIMN S1 at on the water surface and lean your body on the board.
2. Press both start buttons to move forward, tilt the board to turn, and release both buttons to stop.
Attention:
• Always wear life-saving equipment during use.
• Children and swimming beginners should use the product under constant supervision.
• Please pay attention to the battery status. When the red light is continuously on, please charge the product as soon as possible.
Splashing
1. Install the two provided water gun nozzles by tightening them on clockwise.
2. Press both start buttons to splash.
To Next Page
Loading...